tv codes for a vizio tv

delaro

Distinguished
Codeless search

1. Turn on the component or device that you want to set up.

2. Press and release the button that corresponds with the component that you’re programming. For example, if you want the remote to control the TV or Blu-ray player, hit and release the TV button or Blu-Ray button. The on/off button will light up and should remain lit.

3. Now, simultaneously press and hold the component button and the on/off button. The illuminated on/off button will turn off. Then it should turn back on.

4. Release both buttons after the on/off button relights. It should remain on.

5. Now, press and release the play button on the remote. If the component that you’re programming does not turn off after 5 seconds, continue to hit the play button every five seconds until the component turns off.

6 Next press and release the reverse button. Wait to see if the component turns back on, and press it every three seconds until it does.

7. Press and release the stop button to save the programming for the device in the remote’s memory.

8. Repeat steps one through seven for each additional device you wish to program

Or go here and input your remote model # and TV info.

http://www.rcaaudiovideo.com/remote-code-finder/

With Vizio I normally just stick with Vizio universals or a OEM remotes since they are $6-$14 on Amazon.
 

delaro

Distinguished
Codeless search

1. Turn on the component or device that you want to set up.

2. Press and release the button that corresponds with the component that you’re programming. For example, if you want the remote to control the TV or Blu-ray player, hit and release the TV button or Blu-Ray button. The on/off button will light up and should remain lit.

3. Now, simultaneously press and hold the component button and the on/off button. The illuminated on/off button will turn off. Then it should turn back on.

4. Release both buttons after the on/off button relights. It should remain on.

5. Now, press and release the play button on the remote. If the component that you’re programming does not turn off after 5 seconds, continue to hit the play button every five seconds until the component turns off.

6 Next press and release the reverse button. Wait to see if the component turns back on, and press it every three seconds until it does.

7. Press and release the stop button to save the programming for the device in the remote’s memory.

8. Repeat steps one through seven for each additional device you wish to program

Or go here and input your remote model # and TV info.

http://www.rcaaudiovideo.com/remote-code-finder/

With Vizio I normally just stick with Vizio universals or a OEM remotes since they are $6-$14 on Amazon.
 
Thread starter Similar threads Forum Replies Date
L Streaming Video & TVs 5
D Streaming Video & TVs 1
S Streaming Video & TVs 2
M Streaming Video & TVs 1
P Streaming Video & TVs 1
M Streaming Video & TVs 2
R Streaming Video & TVs 0
R Streaming Video & TVs 0
P Streaming Video & TVs 3
M Streaming Video & TVs 1
D Streaming Video & TVs 1
R Streaming Video & TVs 1
R Streaming Video & TVs 1
R Streaming Video & TVs 0
P Streaming Video & TVs 4
E Streaming Video & TVs 4
B Streaming Video & TVs 1
B Streaming Video & TVs 1
L Streaming Video & TVs 1
A Streaming Video & TVs 1

ASK THE COMMUNITY