what specific port do I need to use on Sharp Model LC-60EQ10U to connect an MPOW Bfluetooth SPDIF&AUX Transmitter and Receive

Feb 14, 2018
1
0
10
0
I have followed the vague instructions listed in the user manual and have not been able to engage the tv-bluetooth device connection. I have used several audio jack wires into the 1) digital audio output slot 2) component audio output terminals with no positive results. Any ideas yiou have would be helpfull. Thanks, David
 
Your TV has both optical digital audio and line level audio output. The RCA jacks associated with a component video input would be audio inputs so those cannot act as outputs.
You may have to turn the audio output on and the TV speakers off in the TV menu.
If you use the optical out you may have to set it to PCM stereo in the TV menu.
You can check the TV manual here.
http://tv.manualsonline.com/manuals/mfg/sharp/lc60eq10u.html
Then you have to set the MPOW to transmit rather than receive.
 
Your TV has both optical digital audio and line level audio output. The RCA jacks associated with a component video input would be audio inputs so those cannot act as outputs.
You may have to turn the audio output on and the TV speakers off in the TV menu.
If you use the optical out you may have to set it to PCM stereo in the TV menu.
You can check the TV manual here.
http://tv.manualsonline.com/manuals/mfg/sharp/lc60eq10u.html
Then you have to set the MPOW to transmit rather than receive.
 
Thread starter Similar threads Forum Replies Date
xsurv Audio 0
kylelb Audio 1
PJGuy Audio 2
R Audio 3
U Audio 2
C Audio 3
M Audio 3
P Audio 1
M Audio 3
M Audio 1
T Audio 6
WillTheTitan Audio 2
T Audio 6
D Audio 1
Z Audio 1
V Audio 4
O Audio 4
J Audio 1
C Audio 2
M Audio 1

ASK THE COMMUNITY