Yamaha RX-V483 connected to TV through HDMI no picture

[rbenson87]

I connected just as the directions called for. Plugged the HDMI from the ARC input on the HDTV to the HDMI ARC OUT on the receiver. Plugged the HDMI from the cable box to the receiver in the 2nd HDMI input slot on the receiver just like the directions said.

No image

 

[americanaudiophile]

Did your select the HDMI input on the TV that you connected the receiver to?
Did you select HDMI 2 on the receiver as your source?
Check the receiver input set up menu to be sure that HDMI 2 connection you used is assigned to the input name you are selecting.
Connect the cable box to the TV directly using the same cable you now have going to the HDMI out of the receiver. That will tell you if the receiver is not set correctly.