Connect the Battery to a UDI Quadcopter

The UDI Quadcopter, an Amazon bestseller, has a reputation as an affordable and fun remote-controlled copter that children and adults can enjoy for hours. When you first receive your quadcopter, you will see that it contains several parts in the packaging. The first thing to do when you open up your copter is to connect the batteries, so you’ll be well on your way to having fun with your new toy.

Step 1: You will need to install batteries into the quadcopter’s transmitter, which is the control for the copter. Take a Phillips screwdriver and loosen the screw on the back of the transmitter. Put four AA batteries into the transmitter. Remember to tighten the screws after you’re done.

Step 2: You will receive a single battery to insert into the UDI Quadcopter. Note a slot near the middle of the quadcopter, where you will slide in the battery.

Step 3: The battery is connected to an output cable. Put the output cable into the quadcopter’s cable, which should be placed inside the plastic flap with the battery.

Step 4: If the battery is connected properly, you will see the quadcopter light up. In the absence of lights, then reconnect the battery’s output cable to the one on the quadcopter.

Recap: You should be able to play with the quadcopter right away, since the battery is charged upon arrival. However, after a while, you will need to recharge the battery and give it time so it can be used again.