Archived from groups: alt.tv.tech.hdtv (
More info?)
I noticed the signal coming in from my cable box is 1080i. Is this set by
the cable company or is there a way I can set it to 720P? Also, I thought
DVD's were in this range as well, but when I play a movie on DVDP it shows
in 480P. It's a couple of years old, are the newer once better?
"Alan Figgatt" <afiggatt@comcast.net> wrote in message
news
😛8CdnS51qubt6ArcRVn-jw@comcast.com...
> curmudgeon wrote:
> > If your set's a rear projection with crt's, you can only display 1080i
for
> > HD. Plasma and LCD sets max resolution is usually 720p.
> > And 720p is not better than 1080i. Multiply 1080 x 1920 and 720
x
> > 1280....which one gives the highest number?!
>
>
> Overly simplistic answer. 720p means progressive update rate of 60
> frames per second, while 1080i has higher resolution but an interlaced
> update rate of 60 frames per second where the entire picture is only
> updated at a 30 fps rate. Which is better has been hotly debated for
> over 10 years dating back to when they were testing to select which
> broadcast standards to pick for HD TV. The effect of the interlacing is
> to reduce effective resolution for moving images. The short answer is
> that 720p is regarded as better for sports or fast motion scenes shot
> with progressive video cameras while 1080i has higher resolution which
> looks better for still or slow moving scenes. So ABC, Fox, and ESPN are
> broadcasting 720p while the other networks have selected 1080i.
>
> For the Hitachi, if it an CRT RPTV, yes, 1080i may be the only choice.
> However, the best answer for those with fixed pixel displays is to
> experiment with it if that is possible, try out both 720p and 1080i as
> the output to the TV and see which one looks better. It may depend on
> which network you are looking at.
>
> Alan