Adding more speaker driver to a single driver bluetooth speaker

Jun 22, 2018
2
0
10
0
Hello, i have a Bluetooth speaker but it only came with a single speaker driver. So, i had a another speaker driver laying around, so i thought if it's possible to wire the old speaker driver to the bluetooth speaker.

Here i attached 2 image to roughly what I'm trying to do, i want to connect Speaker 2 (Blue Labeled) to Speaker 1 (Red Labeled) by disconnecting wire from Speaker 2 board and connecting it to Speaker 1 board. So im adding Speaker 2 to Speaker 1, so two speakers.


 
The small amp in the bluetooth speaker isn't likely to have enough power to drive two speakers. It may also be damaged by your trying it. You could try using the better of the speakers but that might not be safe either if the impedance is lower than the original speaker.
 
Jun 22, 2018
2
0
10
0


Yes, i read there wouldnt be enough power to drive the other speaker too. Instead, i replaced the speaker driver with the other one. So far no problem. Thanks
 

ASK THE COMMUNITY