Question alcatel onetouche t10 tablet

razorcool

Estimable
Dec 9, 2015
1
0
4,510
0
my tablet is old i know that but is it possible to make my 16gb sd to work as internal memory and how? link will be helpful on how to
 
It would not on that device, unless you could upgrade to version 6.0 of Android (also called "Marshmallow"). That version is the minimum version that allows for that change. I will include the instructions on how a card is made internal below, but without the ability to have the right version of Android, not much you could do.

And some might say to try rooting the device, but I would never ever recommend that. To easy for it to brick the device.

First, you need to be using a tablet that is running at least Android "Marshmallow" (6.0) or newer, or be able to upgrade to it. Second, you will need the instructions I am including below. And third, you need a tablet that has not been restricted by the manufacturer from making this change. Which does happen.


NOTE: If any of the steps are missing on your tablet, or they don't work for you, then you have a tablet that either has an older Android version or has been restricted by the manufacturer. If that is the case, you will not be able to use this information.


How to turn the "External" SD card into "Internal" storage - Option A

NOTE:
Please be sure you start with a blank SD card. It needs to be blank because when the card is converted to "Internal" storage, it will be formatted (wiped) and encoded (making the cards data only readable by that device).

  1. Go to device “Settings”, then select “Storage”.
  2. Select your "SD Card", then tap the “three-dot menu“ (top-right), now select “Settings” from in there.
  3. Now select “Format as internal”, and then “Erase & Format”.
  4. Your SD Card will now be formatted as internal storage.
  5. Reboot your tablet.
NOTE: If you don't reboot the tablet, many things may not work correctly, so make sure you do.


How to turn the "External" SD card into "Internal" storage - Option B

IMPORTANT NOTE:
Be sure you start with a blank SD card. When the card is converted to "Internal" storage, it will be formatted (wiped) and encoded (making the cards data only readable by that device), so anything on it prior would be gone.

  1. Go to "Settings", and then select "Storage & USB".
  2. At the bottom of the list you should see the SD card's details, including the option to format it and make it "Internal" storage.
  3. Once this is done, reboot the device and you can start running things from the card.
IMPORTANT NOTE: If you don't reboot the tablet, some things may not work correctly, so make sure you do the reboot.

An Additional Note: Some apps (like system ones) are not movable. So while you can move downloaded ones, and some of the system ones, you will not be able to move many preinstalled apps.

A Final Note: If you set up the card as "Internal" storage, then the data on it will not be readable by any other device. To access the data you would have to connect he tablet to say a computer and copy it over to the computer from the tablet/card. Otherwise only tablet can read the data. Also, be sure you do not reset (hard or factory) the tablet. If you do, then all the data on the card will no longer be readable, even by the tablet itself.
 
Thread starter Similar threads Forum Replies Date
F Android Tablets 1
S Android Tablets 1
D Android Tablets 1
X Android Tablets 1
P Android Tablets 1
E Android Tablets 1
G Android Tablets 3
2 Android Tablets 1
S Android Tablets 1
R Android Tablets 1
H Android Tablets 1
D Android Tablets 1
D Android Tablets 5
J Android Tablets 4
S Android Tablets 4
W Android Tablets 6
Q Android Tablets 1
Z Android Tablets 1
G Android Tablets 1
B Android Tablets 1

ASK THE COMMUNITY