M Milan Nikolov Estimable Nov 8, 2014 4 0 4,510 Jul 11, 2015 #1 I have problem with potentiometer on amplifier. I don't know amp model, because it is homemade amp. How do I know that the strength of the potentiometer is needed for that amp? Thanks in advance.
I have problem with potentiometer on amplifier. I don't know amp model, because it is homemade amp. How do I know that the strength of the potentiometer is needed for that amp? Thanks in advance.
Solution kanewolf Jul 11, 2015 It may have a resistance printed on it. If it is not open, you could disconnect it from the rest of the circuit and check it with an ohm meter.
It may have a resistance printed on it. If it is not open, you could disconnect it from the rest of the circuit and check it with an ohm meter.
kanewolf Judicious Moderator May 29, 2013 2,842 2 33,915 Jul 11, 2015 Solution #2 It may have a resistance printed on it. If it is not open, you could disconnect it from the rest of the circuit and check it with an ohm meter. Upvote 0 Downvote Solution
It may have a resistance printed on it. If it is not open, you could disconnect it from the rest of the circuit and check it with an ohm meter.
makkem Distinguished Jan 22, 2012 483 0 20,060 Jul 12, 2015 #4 Hi Just to add to that,when you determine the resistance and come to buy the pot you will need a log one not a lin as it is a volume control. Upvote 0 Downvote
Hi Just to add to that,when you determine the resistance and come to buy the pot you will need a log one not a lin as it is a volume control.
kanewolf Judicious Moderator May 29, 2013 2,842 2 33,915 Jul 12, 2015 #5 makkem : Hi Just to add to that,when you determine the resistance and come to buy the pot you will need a log one not a lin as it is a volume control. Good point!! Upvote 0 Downvote
makkem : Hi Just to add to that,when you determine the resistance and come to buy the pot you will need a log one not a lin as it is a volume control. Good point!!