asus tp200s also stuck restarting after failed auto repair, please help can get to advanced setup but no matter what i doo sti

Status
Not open for further replies.
Note: If this problem started after an update (or system reinstall), please make sure the laptop is not connected to the internet in any way before you use the following instructions.

Try the following...

1. Power off the laptop.
2. Power on the laptop.
3. As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off.
4. Repeat this process a few times until you see the "Preparing Automatic Repair" screen.
5. Now you want to let the laptop boot to the "Automatic Repair" screen.
6. Click "Advanced Options" and then select "Troubleshoot".
7. Here you want to select "Refresh your PC", if you do not wish to erase data, or "Reset your PC" to erase all data and restore your system.
8. From here just follow the screen instructions until the recovery is completed.

NOTE: You will need to get into the "Advanced Options" in order to get the "Refresh Option". This choice will keep your data, but any programs installed will be lost.

Do not do a "Reset" as that will wipe all data you have on the laptop.


Another version of this is the following...

1. Power off the laptop.
2. Power on the laptop.
3. When screen turns black, hit F10 and ALT repeatedly until the computer shuts off.
4. You shouTo fix the computer you should choose the second option listed.
5. When the next screen loads, choose the option "Reset Device".
6. Now choose which ever type of reset you wish.
7. Your coputer should now restore itself to "Factory Settings".

NOTE: If you get a message saying "Error Resetting Device", then you should have the computer looked at by the manufacturer (if still under warranty) or by a tech.

 

katiekinda18

Prominent
Nov 8, 2017
3
0
510


 

katiekinda18

Prominent
Nov 8, 2017
3
0
510
i have tried this several times to no avail, i can get to the boot menu etc, and have also by pushing contrl and escape while pwering on i have been able to access cmnd. prompt but do not know what to do when i get there. everythng ive tried hasnt worked and my transformer touchscreen that is sorely missed is still stuck in a perpetual restart. any ideas
 
Status
Not open for further replies.