Question av receiver sound not working

Aug 21, 2019
1
0
10
0
Hello Guys,

im having a problem getting the sound going with my onkyo av receiver tx sr 576.

Im having the receiver connected with an optical cable to my computer.
The receiver settings are set to cd through optical 2 input. It worked before but stopped working without any to me known reason.
Im not very knowledgeable with these things and dont know what else i could describe to you. I had a look in the receiver manual but couldnt figure it out!

Any help would be much appreciated! Cheers Michael
 
Check that the optical output of the computer is turned on and working. You should be able to see an indication of this in the audio control panel.
Check that optical 2 is still assigned to CD in the receiver input set up menu.
AVRs are enough like computers that either will change settings for no good reason.
 
Thread starter Similar threads Forum Replies Date
J Audio 6
Picklerick Audio 1
A Audio 2
D Audio 4
P Audio 2
S Audio 1
T Audio 2
J Audio 11
M Audio 3
S Audio 4
L Audio 1
A Audio 1
T Audio 1
A Audio 4
M Audio 1
B Audio 5
H Audio 4
J Audio 1
M Audio 5
M Audio 1
Similar threads
Question How do I connect an older Yamaha AV receiver with no optical or HDMI, only RCA, to my TV and able to play sounds.
Question Need help figuring out which receiver to get for my surround sound?
Question All I get is static(white noise) when I use optical on my av receiver
Question Connecting soundbar and audio receiver with surround sound to tv
Question Philips Fidelio soundbar HTL 9100 receives no sound from TV
Sansui G-7500 and ELAC Debut F6.2 speakers - "caution: 8 ohm or higher" warning on receiver, ELAC's are gorgeous sounding, but
surround receiver only producing sound in one set of speakers
Can't get sound from my PC to go through my TV receiver.
Solved! Yamaha RX-V467 digital receiver to connect sound from Toshiba TV that uses WLAN for built in VUDU app?
How can I set up 5.1 surround sound, 144Hz refesh rate with PC, Monitor and Receiver.
How to connect Sony STR-DN1080 receiver, HT-ST5000 sound bar, and XBR-75Z9D TV?
Sound wont work through receiver
Help. NO rear sound! 5.1 Receiver shows DTS mode on. Rear speakers work in other occasions.
Sony STR-DN1080, 5.1 surround back speakers don't work even though they work in the setup using test tone.
i have 5.1 sound system and its 140 watts pro speaker and want to work in big room and loud, cann i buy 150 watt AV RECEIVER?
Do I need multiple HDMI inputs on Surround Sound Receiver or will 1 HDMI work? TV has 4 HDMI Inputs.
Soundbar won't work with receiver.
Sound from older receiver not working on HDTV with HDMI cable box
Will any surround sound receiver work with and surround sound speakers?
issue with pioneer receiver sound - works only in 7 speaker config

ASK THE COMMUNITY