Archived from groups: alt.video.satellite.mpeg-dvb (
More info?)
if you have multiple lnbs and are using a switch then blind search may cause
odd results like no transponders founded (gotta love that message) or not a
full list of transponders. either disconnect the switch (with the power
off) plug in the cable from the lnb directly to the receiver and do a search
for each lnb that way or try turning disecq off for all lnbs except the one
you're scanning. I've found that turning the unit off and back on after 15
seconds is needed for the change to take place.
Blind search should find all the transponders for you and then search for
channels on those transponders. When you do blind search of course you have
to select the correct satelite and scan each sat.
"gopher2" <admin@gophnet.org> wrote in message
news:0ZadnepBwMTT3KrcRVn-ig@giganews.com...
> I cleared out all channels and transponers, started with just a list of
> satellite names and locations.
> I aim the dish and do smart search, It then starts searching and then is
> done after 2 seconds and says 0 transponders found. Then i attempt to do
the
> search again and it seemes to work. weird.....
>
>
> "Valdivar" <rebelleader68@hotmail.com> wrote in message
> news:FfFZc.25111$7i2.905883@news20.bellglobal.com...
> > the RECEIVER you have should do just fine.
> >
> > "gopher2" <admin@gophnet.org> wrote in message
> > news:HpidnYeImeDmPKvcRVn-pw@giganews.com...
> >> i got a 1.2m ku dish on a pansat 2500a dvb reciver
> >> unless i am wrong, to do a blind search or blind scan on the 2500a i
need
> > to
> >> know transponder information before it can do any searching.
> >> With what reciever can i point my dish at a sat and not knowing any
info
> > at
> >> all, search for all programs coming from that sat?
> >>
> >>
> >>
> >>
> >
> >
> > ---
> > Outgoing mail is certified Virus Free.
> > Checked by AVG anti-virus system (http
/www.grisoft.com).
> > Version: 6.0.745 / Virus Database: 497 - Release Date: 8/27/2004
> >
> >
>
>
Facebook
Twitter