Blue Snowball pins bent

[SkoomZ]

After some careless useafter I let someone borrow it till they got a new headset... it came back with its prongs(?) bent, and the plastic block piece missing, would this be fixable? Check below for screenshots
[EDIT] oops forgot pictures.
https://i.gyazo.com/18b0faa7e077ebe102a9984a900b338e.jpg
https://i.gyazo.com/7e36b1bdbac881e72a889fd95576620b.jpg

 

[katalyst12]

Your only option would be to physically replace the usb port on this microphone. Here is a video of somebody fixing the same thing. https://www.youtube.com/watch?v=bhj8nh1kt3M

 

[SkoomZ]

Thanks i'll take a look, thinking about getting a Yeti/HyperX Cloud headset in a few months if all else fails.

 

[SkoomZ]

I'm guessing the prongs are supposed to be straight?

 

[katalyst12]

The prongs are supposed to be bent, but without that center block there is nothing to keep the pins in contact when the cable is plugged in. you could bend the pins back into position, but you'd have to replace that block for it to work. easier to replace the port entirely.