Build for AutoCAD

[Guest]

Hello there!

I would like to ask if this build can run Autocad 3D smoothly.

Intel Pentium G4560 (Kaby Lake)
MSI H110M PRO-VD Plus
AMD Firepro W4100
G.SKILL RipjawsV DDR4 2133MHz 8GB (2x4GB)
120GB SSD

 

[kanewolf]

Be careful with an H110 and a Kaby Lake. You probably need a BIOS update. You may need a working CPU to do the update. Check the manufacturer's webpage on BIOS support.
8GB RAM isn't a lot for 3D modeling. Same with 120GB SSD. Not a lot of room.

 

[Guest]

Be careful with an H110 and a Kaby Lake. You probably need a BIOS update. You may need a working CPU to do the update. Check the manufacturer's webpage on BIOS support.
8GB RAM isn't a lot for 3D modeling. Same with 120GB SSD. Not a lot of room.

But can a Pentium G4560 do the 3D works?