capt11b stuck on aptio setup

rachelh143

Commendable
Jan 25, 2017
5
0
1,510
i have a tablet pc windows 8 an im stuck on aptio setup. i just turned it on and it was on shell version 2.31 5.9
 
Try the following and see if it resolves the problem.

1. In the Aptio Setup Utility, select the "boot" menu and then select "Launch CSM" and change it to "enable".

2. Next select the "Security" menu and then select "secure Boot Control" and change to "disable".

3. Now select "Save & Exit" and press "yes".

4. Once you have done this, hold down the "power" button until the laptop turns off completely.

5. Now you want to power it back on and continually press the "F9" button for about ten seconds or until you are taken to the "Windows Recovery Menu".

6. In here select "Advanced Start Up" and then, once the recovery menu appears, select "Advance Options".

7. Choose "System Restore" and select a date prior to when the problem started.

The computer should now go through the restore process and then start normally for you.
 

rachelh143

Commendable
Jan 25, 2017
5
0
1,510

i don't have a solution, more like a question. my problem is when i go to the boot menu it doesn't have anything that says csm launch. or when i go to security there's nothing that says secure boot control either
 

rachelh143

Commendable
Jan 25, 2017
5
0
1,510


when i got to the boot menu i see
setup prompt timeout
bootup numlock state
quiet boot
fast boot
vga support
usb support
ps2 devices support
network stack driver support
boot option #1
 

rachelh143

Commendable
Jan 25, 2017
5
0
1,510

then when i go to the security menu it says
password description:
administrator password
user password
secure boot menu
secure flash update