Solved! charging problem and not turning on

Solution
Try the following and see if it will turn on.

1. Remove the battery.
2. Press and hold the "Power" button for 20 seconds.
3. Now put the battery back in.
4. Plug it in to charge and allow it to fully charge before turning it on.

If this doesn't help, then test the charger cord to see if it is good. Either try your cord in another device, or try another devices cord on your device.

Should that not be the problem, then check the battery to see if it needs replacing.

NOTE: Yes, I know tablet batteries are not so easy to get to, on some devices. In such a case, make sure that your tablet is not under warranty still before you try opening it up yourself. If it is under warranty, then contact the manufacturer first.
Try the following and see if it will turn on.

1. Remove the battery.
2. Press and hold the "Power" button for 20 seconds.
3. Now put the battery back in.
4. Plug it in to charge and allow it to fully charge before turning it on.

If this doesn't help, then test the charger cord to see if it is good. Either try your cord in another device, or try another devices cord on your device.

Should that not be the problem, then check the battery to see if it needs replacing.

NOTE: Yes, I know tablet batteries are not so easy to get to, on some devices. In such a case, make sure that your tablet is not under warranty still before you try opening it up yourself. If it is under warranty, then contact the manufacturer first.
 
Solution

farneezzuwena786

Prominent
Aug 25, 2017
5
0
510
MERGED QUESTION
Question from farneezzuwena786 : "charging problem and not turning on"



what to do when my android tablet is not charging or turning on
 
Actually, while it may not have a door to the battery, it does have a battery that can be accessed. Just, as stated before, not always so easily. In some cases you can find videos online that will walk you through it, as many people have the problem opening them. However, again, if it is under warranty, don't open it yourself, contact the manufacturer.