Clean inside of 65" plasma front glass?

schindlerbrian

Prominent
Feb 1, 2018
1
0
510
0
I got my Panasonic TC-P65VT60 plasma tv wet during transportation. No water got in the back, and it powered on with perfect picture for the few seconds it was on for testing. However, a tiny bit of water got behind the front plate glass because this model has the front glass over the top of the bezel. It's drying up on its own, but water marks are left behind on the glass and there are lingering micro specs of moisture on the plasma display itself. Is it possible to remove the plasma display from the frame in order to clean the glass and make sure the display is dry before powering it back up?
 
Thread starter Similar threads Forum Replies Date
F Streaming Video & TVs 1
E Streaming Video & TVs 5
H Streaming Video & TVs 2
B Streaming Video & TVs 1
G Streaming Video & TVs 2
H Streaming Video & TVs 1
I Streaming Video & TVs 12
C Streaming Video & TVs 1
R Streaming Video & TVs 3
K Streaming Video & TVs 5
S Streaming Video & TVs 1
G Streaming Video & TVs 11
M Streaming Video & TVs 1
ITclimber Streaming Video & TVs 3
P Streaming Video & TVs 1
exfileme Streaming Video & TVs 9
tuanmai Streaming Video & TVs 1
H Streaming Video & TVs 1
Marcus Yam Streaming Video & TVs 18
JMcEntegart Streaming Video & TVs 87

ASK THE COMMUNITY