A ac1d 53rp3n7 Distinguished Jun 12, 2010 14 0 18,560 Sep 16, 2010 #1 Hi, I have 2 speakers with a standard stereo cable connector(2 bare wires), how can i connect these both to 1 3.5mm stereo plug to use for my pc, thanks in advance, dave
Hi, I have 2 speakers with a standard stereo cable connector(2 bare wires), how can i connect these both to 1 3.5mm stereo plug to use for my pc, thanks in advance, dave
M MEgamer Distinguished Dec 19, 2009 810 0 18,960 Sep 17, 2010 #2 are these bare wires connected to binding post on your speakers?
A ac1d 53rp3n7 Distinguished Jun 12, 2010 14 0 18,560 Sep 17, 2010 #3 binding post? all i can say is that they have no plug just 2 bare wires from each speaker http/www.amazon.com/Monster-Standard-THX-Certified-Speaker-Cable/dp/B00008VF91/ref=sr_1_6?s=electronics&ie=UTF8&qid=1284750304&sr=1-6 just wire
binding post? all i can say is that they have no plug just 2 bare wires from each speaker http/www.amazon.com/Monster-Standard-THX-Certified-Speaker-Cable/dp/B00008VF91/ref=sr_1_6?s=electronics&ie=UTF8&qid=1284750304&sr=1-6 just wire
M MEgamer Distinguished Dec 19, 2009 810 0 18,960 Sep 17, 2010 #4 ull need to connect these speakers to an amplifier.
A ac1d 53rp3n7 Distinguished Jun 12, 2010 14 0 18,560 Sep 17, 2010 #5 ok, cant i bodge the wires into a connector?
M MEgamer Distinguished Dec 19, 2009 810 0 18,960 Sep 18, 2010 #6 nope, a 3.5mil is a low current output, speakers wires are for high current outputs, ie a speaker out.
nope, a 3.5mil is a low current output, speakers wires are for high current outputs, ie a speaker out.
A ac1d 53rp3n7 Distinguished Jun 12, 2010 14 0 18,560 Sep 18, 2010 #7 i have found it is do-able by converting the speaker wire into a 2x rca to 3.5mm y splitter in short explanation
i have found it is do-able by converting the speaker wire into a 2x rca to 3.5mm y splitter in short explanation