Connecting two different subs to amp

[Jason_187]

Car audio subs

I have one 2ohm dvc kicker 10 (so 1 ohm or 4 ohm) and one pioneer 12 svc 4ohm sub. And a 1000watt amp that is two ohm stable. So should i run the dvc in series making it 4 ohm and connect that to my 12" in parallel, making a 2 ohm

 

[americanaudiophile]

You don't want to use a series connection (reduces the damping factor of the amp) because it will not sound as tight.
Just use one voice coil of the Kicker in parallel to the Pioneer.

 

[Jason_187]

You don't want to use a series connection (reduces the damping factor of the amp) because it will not sound as tight.
Just use one voice coil of the Kicker in parallel to the Pioneer.

Each coil on the kicker is 2 ohm. So if i run one coil on the kicker in parallel with the 4 ohm svc. 2ohm in parallel with 4ohm would my amp be able to handle that?

 

[Jason_187]

I was only referring to use in series only on the dvc to bring it up to 4ohm so i could run both 4ohm (one being the dvc that is already in series to bring to 4ohm and the other 4ohm being the 12 svc) speakers in parallel