sunnyimran

Distinguished
Jun 4, 2009
13
0
18,560
Hi guys,

1) what is the difference between HOME AUDIO and COMPUTER SPEAKERS?
How do we compare home audio (home theater/LCD TV ) speakers with
5.1 /7.1 computer speakers?

2) 5.1 / 7.1 speakers , please compare CREATIVE INSPIRE series with some middle price LOGITECH / EDIFIER


Thanks
 

MEgamer

Distinguished
Dec 19, 2009
810
0
18,960
home theatre tends to have higher wattage rating. thats the main difference.
they will also have bigger drivers so they have larger dispersion, this does not usually mean louder, but it will fill the room more easily and speakers placement wont be a fuss.
if you buy home theatre packages from asian electronics company, such as samsung and LG, then buy the higher end ones otherwise, you are better off buying a logitech....

2) logitech will be louder, and bassier, quality wise there is not that much difference... heck they are proper COMPUTER speakers, and that aint a compliment.... get the logitech.
 

sunnyimran

Distinguished
Jun 4, 2009
13
0
18,560
Thanks guys,

Currently in need to buy speakers to use with my computer supporting 7.1 audio,

in future, I will buy LED HD TV and would need speakers there too,

so I thought buy a middle price good one and use with both of them as needed.

So wattage and dispersion is the only difference?

Is this a myth / fact ? that computer speaker output is low but crisp & clear compared to home theater

 

MEgamer

Distinguished
Dec 19, 2009
810
0
18,960


myth??? lol not true at all strictly speaking, it all depends on the sensitivity, most computer speakers have over 85dB/watt whereas home theatre are around 85 or even lower, especially the high end ones -there pigs to drive...

proffesional PA speakers and cinema are the most efficient, with most speakers over105dB/watt. concerts only need about 10000 watts (e.g. outdoor venues) and thats saying something, compared to some stuck up car audio fags, with over 50000watts that can only fill a large hall...
 

anwaypasible

Distinguished
Oct 15, 2007
718
0
19,010
not much different comparing home receivers and amplifiers.
they give us watts and moderate distortion values.. that still leaves much room (and blindness) between different amplifiers.
dont know what is what, as if we are too stupid to learn.

low harmonic distortion isnt the same as having transients (or even transient distortion)
you need both if you want to rise above the junk.
 

sunnyimran

Distinguished
Jun 4, 2009
13
0
18,560
so it all depends on quality, senesitivity, output db/watt be it computer speaker or home theater or Amps system, or car audio.....


 

MEgamer

Distinguished
Dec 19, 2009
810
0
18,960


u mean low harmonic distortion has no relation to transients? cos if so then yes, theorectucally, they have no relation watsoevaaaa.
 

sunnyimran

Distinguished
Jun 4, 2009
13
0
18,560
Right now, my speakers(2.1 creative) are driven with a low end 7.1 PC audio with integrated Realtek RTL1200 chip on my mobo.

I want to buy a low to middle budget 7.1 speakers, then later a middle budget sound card and also want to use same speakers with LED TV system.

Use is occassional and selected music audio, occassional gaming but whenever played, should give audio charm. Due to occassional use, low to medium budget.



 

MEgamer

Distinguished
Dec 19, 2009
810
0
18,960
Its not what it outputs its what driving the speakers. Normally using a pc you have a smaller amp/receiver thats able to power any bigger speakers where home theatre av receivers come in all shapes in sizes from low powered to high powered.
First you need to look what will be driving them then you match the speakers to avoid clipping and such.

Whats your budget and we can put you a decent setup together. 5.1 is great more expensive but speaker setup in the day counts with it. The buying the system is the easy part. Setting the speakers just right is the mix and move and sometimes a bit frustrating part. But once you get it spot on a cheap low end system can sound beyond believe. Most people just upgrade theyre speakers thinking its junk coz they really ever setup it up in a perfect 5.1 surround way

just so you know PC speakers dont have a receiver... receiver is an amplifier with a radio receiver, hence why its called a receiver - its not cos it 'receives' signals...
 

MEgamer

Distinguished
Dec 19, 2009
810
0
18,960
probably because the amp is build into the speakers the sub normally thats why. All pc speakers got amps built into them unless its teeny lil speakers. A soundcard doesnt have the power to supply enough power to it it will burn. So they all come amps

http://www.newegg.com/Product/Product.aspx?Item=N82E16836121006&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-_-na-_-na-_-na&AID=10440897&PID=3067296&SID=

no really...
 

anwaypasible

Distinguished
Oct 15, 2007
718
0
19,010
i suppose 'receivers' nowadays are amplifiers that have the ability to receive surround sound formats.
anything with a radio tuner and amplifier is now just a 'radio'
 

anwaypasible

Distinguished
Oct 15, 2007
718
0
19,010



for instance..
an amplifier with a radio is a TUNER

because the amplifier can receive a signal from the tape deck or record player.. that means its an amplifier.
you might want to say 'the dial for selecting tape or radio makes it a receiver'
well that isnt true.
the same way a knob adjusts the frequency on the radio.. the other knob adjusts the inputs.
therefore its a TUNER, until it can receive a digital surround format.
and the reason they call it a receiver is because the listener 'receives' more realism from the video with surround sound.


such a thing as strong stereo effects back then (could pan from front to back) ... yea sure.
but the output wasnt dedicated, and the pan wasnt extreme or controllable.
people tried to pickup the name 'receiver' because of such low distortions.
 

anwaypasible

Distinguished
Oct 15, 2007
718
0
19,010
integrated amplifiers are simply an amp.
receivers have to process a digital signal.

sorry of you that you cant define 'tuner'

and no.. an A/V surround sound unit does NOT have to have five internal amplifiers.
the entire capacitor bank can be a solid unit, and each transistor is connected to the bank.
thats ONE amp with five outputs.

being confused is one thing.. arguing with me after i have given you a clear definition is totally dumb.
 

MEgamer

Distinguished
Dec 19, 2009
810
0
18,960


lmao srsly... what the point saying all this... everybody knows (anyone with knowledge of electronics, or has been taking any courses) that a reciever is any electronic device, with a broadcast detector, whether or not it has a relation to amplifiers.... TVs and telephones have receivers... they do the same thing, they receiver radio waves.... look up on google, or eevn your dictionary....

ur taking the term RECEIVER a little literally...

'audiophiles' that have been spending time only in 'audiophilic forums' never seem to know these basic terms... same goes for V=IR...

btw tuner is only a part of the receiver... tuners need to be fed into an amplifier, whereas reciever have amps integrated into it.

being confused is one thing.. arguing with me after i have given you a clear definition is totally dumb
 

anwaypasible

Distinguished
Oct 15, 2007
718
0
19,010
sure, everybody can say ANY electronic device is a receiver.
but if they are asking for a custom built piece of hardware, they will be paying more when their tuner comes with analog AND digital inputs.

BROADcast.. see the specifics of broad.
because its broad, it requires a tuner to narrow in on the small portion necessary.

'receiving' (of magnitude) requires a DVD portion to have more than one method of input (analog or digital)
if the amplifier has inputs for many different things, but all inputs are analog.. the amplifier is filed as 'integrated'

and that is the real reason of any arguement or confusion.
why does an amplifier have its classification changed simply because there are more than one input.

the word 'integrated' has bounty.
when you turn the dial, the artistic label put forth to the action is 'integrate'
but the same word can be used when adding features to a simple amplifier.. causing confusion of the word 'implement'

one word means 'to add to the current functionality'
the other word means 'to add to seperate functionality'

so with that said, adding an amplifier to the analog preamp outputs.. its an example of adding to the current functionality.
not to be confused with adding a clock or LED display to the amplifier that expresses which input is being used, as that is a seperate functionality of amplifying the audio.
the LED display can amplify the quality of the piece of hardware as it sits.
but adding a VU meter would also be adding to the current functionality IF and WHEN the VU meter is calibrated to indicate when the amplifier starts to clip the soundwaves.
as a monitoring device, it is adding to the current functionality as a safety monitor.
not to be confused with a safety monitor being the same functionality as amplifying the audio.
again, not to confuse 'amplifying the audio' with 'amplifying the audio with monitored safety'

it is a disgusting language that hasnt even begun to use english (as in billiards).

could be taken as a light joke, as it pokes fun.
but i think defining receiver and tuner has little to do with creative versus logitech.. because neither one of them have a tuner.

simply answering the question is 'living'
but
going into details about receiver or tuner is 'living wild'

although some might say answering the question isnt worth 'living'
and going into explanations astray from the original topic is 'living'

people are entitled to their own artistic expression as the accuracy can, will, and does diminish.
 

MEgamer

Distinguished
Dec 19, 2009
810
0
18,960
u can keep trying it again and again, but everytime u come to compare the 2, there is no difference yet the receiver will have a tuner.

"why does an amplifier have its classification changed simply because there are more than one input."

... just so you know a name (receiver) doesnt change its classification.