Solved! Female to dual male headphone splitter

[HydraLM]

I am looking for a headphone splitter that doesn't separate the audio and sound, but makes it so I can send an output signal from a headset and receive an input signal from 2 different sources at the same time. Is there a 1' splitter that can do this? It would be something like this, but I could send and receive from both at the same time.

 

[hang-the-9]

The device you linked is a selector not a splitter. You said "output signal from a headset", a headset does not send output unless you are talking about a microphone on it. Headphones and Headset are a bit different things, one has a mic other does not. You may want to list exactly what you have and what you are trying to do with it. Here is a headphone splitter that will take one output and can send it to two speakers https://www.amazon.com/Belkin-Speak...ocphy=9001809&hvtargid=pla-351184914428&psc=1

 

[HydraLM]

The device you linked is a selector not a splitter. You said "output signal from a headset", a headset does not send output unless you are talking about a microphone on it. Headphones and Headset are a bit different things, one has a mic other does not. You may want to list exactly what you have and what you are trying to do with it. Here is a headphone splitter that will take one output and can send it to two speakers https://www.amazon.com/Belkin-Speak...ocphy=9001809&hvtargid=pla-351184914428&psc=1

Thanks. I have a Razer Kraken and I am looking for a female to dual male so that I could plug into, communicate, and hear a computer and also hear my Nintendo Switch simultaneously. It would basically the same thing that you showed me but with 1 female and 2 male plugs. Thanks for your help.

 

[hang-the-9]

Thanks. I have a Razer Kraken and I am looking for a female to dual male so that I could plug into, communicate, and hear a computer and also hear my Nintendo Switch simultaneously. It would basically the same thing that you showed me but with 1 female and 2 male plugs. Thanks for your help.

A mixer is best here, several audio inputs and one output. Only for headphone though not the mic side. Mic would still go to the computer input but you can mix and match the audio input to the headphones from the sources through the mixer. You will need a couple of 3.5mm to 1/4" adapters to use this.

https://www.guitarcenter.com/Behrin...yN1ZAEXfHYrtTFk7IjxTVZDfTEGUrXKwaAqi0EALw_wcB

Better than a just a splitter since you can have control of the varying levels on each of the inputs to the headphones.

https://www.amazon.com/VCE-2-Pack-6-35mm-Female-Adapter/dp/B01EJ5UV3C/ref=sr_1_22_sspa?dchild=1&keywords=1+4+inch+adapter&qid=1603943796&s=audio-video-accessories&sr=1-22-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExUzhHM1pRQ0tFSDZYJmVuY3J5cHRlZElkPUEwOTMyNzMyNFRSNkZLQTY3UFdWJmVuY3J5cHRlZEFkSWQ9QTA1MDcyOTAyVUVMOFhGMksxMjYwJndpZGdldE5hbWU9c3BfYnRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

 

[HydraLM]

I am looking for a headphone splitter that doesn't separate the audio and sound, but makes it so I can send an output signal from a headset and receive an input signal from 2 different sources at the same time. Is there a 1' splitter that can do this? It would be something like this, but I could send and receive from both at the same time.

I ended up using this, this, and this arranged in a way to complete what I said at first. Thanks for your help!