galaxy note 10.1 wont go passed introduction screen

[yourfriendlyneighborhoodwitch]

my tablet go go past the samsung galaxy note 10.1 screen and i cant get to any factory reset screen or enable safe mode please help

 

[webworkings]

Hmmm.. if it goes to that screen, it should be able to get into "Safe Mode" and also it should be able to do a "Hard Reset". I will include those directions, just in case you wish to try again and to make sure you are using the correct ones.

However, if neither works, you may have to get it repaired. I would first check to make sure it isn't under warranty any longer, as if it is, you don't want to do any physical work on it yourself, or take it to someone other than the manufacturer, or risk voiding the warranty. So if it is under warranty, contact them first.

To get into "Safe Mode" please do the following.

1. First turn off the tablet.

2. Next press and hold "Power" until you see the manufacturers logo on the screen, then release the power button.

3. "Quickly" press "Volume Down" and hold it for few seconds until you see the message "Safe mode: ON" or something similar.

4. If you wanted disable it, simply repeat the steps above, and you should see "Safe Mode: OFF" rather than on.

NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Remove your SD card, if there is one in the device.

3. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

4. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

5. Next use "Volume Down" button to get to the "wipe data/factory reset" option When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

6. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

7. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

8. Then press the "Power" button to hard reset the tablet.

9. If you took your SD card out in step 2, when the device is up and running again, reinsert the SD card.

 

[yourfriendlyneighborhoodwitch]

Hmmm.. if it goes to that screen, it should be able to get into "Safe Mode" and also it should be able to do a "Hard Reset". I will include those directions, just in case you wish to try again and to make sure you are using the correct ones.

However, if neither works, you may have to get it repaired. I would first check to make sure it isn't under warranty any longer, as if it is, you don't want to do any physical work on it yourself, or take it to someone other than the manufacturer, or risk voiding the warranty. So if it is under warranty, contact them first.

To get into "Safe Mode" please do the following.

1. First turn off the tablet.

2. Next press and hold "Power" until you see the manufacturers logo on the screen, then release the power button.

3. "Quickly" press "Volume Down" and hold it for few seconds until you see the message "Safe mode: ON" or something similar.

4. If you wanted disable it, simply repeat the steps above, and you should see "Safe Mode: OFF" rather than on.

NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Remove your SD card, if there is one in the device.

3. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

4. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

5. Next use "Volume Down" button to get to the "wipe data/factory reset" option When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

6. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

7. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

8. Then press the "Power" button to hard reset the tablet.

9. If you took your SD card out in step 2, when the device is up and running again, reinsert the SD card.

sigh* ive tried both of those procedures multiple times and still to no avail, i guess i will just have to go get it repaired. thank you anyway

 

[webworkings]

Sounds like it. Just remember to contact the manufacturer about the repair/replacement, if it is still under warranty. No need to pay for something if you don't have to.

 

[rrushambya]

How can. I enable power mode in my tablet?