How do I connect Frisby speakers to LED TV?

[xsilicon9]

I'm trying to connect my LED TV-Model no LF391EM4F to Frisby FS-5007. Will I only be able to hook it up to 2.1 sound unless I get a receiver and hook it through that for 5.1?

Here is image of the video inputs and outputs on both.
TV:

Frisby:

 

[getochkn]

Computer speakers aren't meant for TV hookup or through a receiver/amp.

First, they need 6 separate inputs, which no TV or recevier has 6 outputs for line level devices.

Second, the computer speakers already have an AMP built into them, so you can't use a receiver either.

Best solution, go buy a cheap surround system or soundbar.

 

[xsilicon9]

Computer speakers aren't meant for TV hookup or through a receiver/amp.

First, they need 6 separate inputs, which no TV or recevier has 6 outputs for line level devices.

Second, the computer speakers already have an AMP built into them, so you can't use a receiver either.

Best solution, go buy a cheap surround system or soundbar.

Can I use a coaxial to 5.1 decoder like this? http://www.amazon.com/Panlong-Dolby-Digital-Audio-Decoder/dp/B00JKBMXCI/ref=lh_ni_t?ie=UTF8&psc=1&smid=A1TXJ8YQ6MM9JH

The speakers don't have an amp built in. They connect to the subwoofer that has the amp and provides the power.

 

[americanaudiophile]

You can use a decoder like the one you link to if the remote of the speakers has volume control. The digital output of the TV will be fixed volume.

 

[xsilicon9]

You can use a decoder like the one you link to if the remote of the speakers has volume control. The digital output of the TV will be fixed volume.

Okay.Also do you know if it will work if I connect a receiver to the amp?So if my setup is from TV to receiver to amp? Will that work?