Hello, I'm building a boombox and I'm making it a 3 way (with tweeters, woofers and a subwoofer)
Woofers:http/www.ebay.com/itm/331196777540?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Tweeters:http/www.ebay.com/itm/151787714089?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Now my question is about the subwoofer. I found a 3W subwoofer that is a bit old but stills gives awesome bass and is "small" and I really like it so I wanted to add it to my boom box to give some more bass felling.
I only got the subwoofer, the amplifier was broken and I tried a 5W amplifier and put some lower frequencies on the subwoofer and it worked really well. But this way the subwoofer gets higher frequencies so I went to ebay, did my searching and found this Pre Amp that supposdely works as a subwoofer crossover.
Pre Amp: http/www.ebay.com/itm/332006640502?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Now, I know I have to plug the Audio input and the 12V but where does the output go? To my 5W amplifier input with one channel only? (So the stereo ampifier turns into a mono one) and plug the subwoofer on its output?
Heres a schematic for you to understand it better.: http/prntscr.com/ec6wgl
Do I wire it as shown on the image?
Thank you all for your help!
Woofers:http/www.ebay.com/itm/331196777540?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Tweeters:http/www.ebay.com/itm/151787714089?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Now my question is about the subwoofer. I found a 3W subwoofer that is a bit old but stills gives awesome bass and is "small" and I really like it so I wanted to add it to my boom box to give some more bass felling.
I only got the subwoofer, the amplifier was broken and I tried a 5W amplifier and put some lower frequencies on the subwoofer and it worked really well. But this way the subwoofer gets higher frequencies so I went to ebay, did my searching and found this Pre Amp that supposdely works as a subwoofer crossover.
Pre Amp: http/www.ebay.com/itm/332006640502?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Now, I know I have to plug the Audio input and the 12V but where does the output go? To my 5W amplifier input with one channel only? (So the stereo ampifier turns into a mono one) and plug the subwoofer on its output?
Heres a schematic for you to understand it better.: http/prntscr.com/ec6wgl
Do I wire it as shown on the image?
Thank you all for your help!