How to Hook up Speakers and Computer to Amp

Martialla

Honorable
Jun 14, 2013
6
0
10,510
0

Martialla

Honorable
Jun 14, 2013
6
0
10,510
0
Oh dang it; my links are broken.

These are the Dayton Audio speakers:
http://www.parts-express.com/pe/showdetl.cfm?Partnumber=300-652

This is the Lepai amplifier:
http://reviews.cnet.com/amplifiers-preamps-processors/lepai-lp-2020a/4505-7871_7-35190789.html

I hope they're not broken this time.

Thanks to the posts, I understand I need a 3.5mm to RCA stereo cable to connect the amp to the computer. But I don't know how to connect the speakers to the amp. As you can see in the link for the speakers, the speakers come with cables that have a small metal extensions. I don't know where the extensions go or what cables to use in order to connect the speakers to the amp.

Thanks both of you for replying and thanks for reading my post.



 

atarione

Distinguished
Apr 15, 2003
38
0
18,610
7
If you have not already ordered

dayton changed manufactures of the B652 speakers awhile ago... end user reports indicate that these new production models are significantly different (for the worse) than the previous well reviewed versions.


alternatives..

Polk Monitors (polk direct on ebay has some nice deals)

Micca Motion MB42 ($50~) on amazon

pioneer has some well reviewed bookshelf offerings

way more money $220 ~ish cambridge S30

$100~ MORDAUNT SHORT Carnival 1
http://www.accessories4less.com/make-a-store/item/MORDCARN1CAL/MORDAUNT-SHORT-Carnival-1-Bookshelf-Speaker-Cherry-Pair/1.html



personally i would (and did) get a bit nicer t-amp (I have a SMSL SA-S3 which cost about $60 shipped came with a nice 4A power supply (the lepai has iffy (imho) build quality and comes with a terrible 2A power supply... it is advisable (at added cost) to replace the Power supply with a 5+ power supply.... however if you are going to do that might as well get a better t-amp to start with.

the Topping TP20 MKII ($70~ish on amazon) is also quite nice.

speaker wise ...I love used speakers my monitors are flanked by JBL L1 speakers I got for $40 (these cost about $800 new)

pic...



Uploaded with ImageShack.us

the other speakers in this shot are some B&W V202's I paid $20 for ...

right now I'm listening to the JBL's w/a $20 used Yamaha C-60 pre amp and a $7 Elan Z660 Power amp (bridged 120WPC) ... so ya' im into this $67 and for under $70 it is kicking much ass....
 

atarione

Distinguished
Apr 15, 2003
38
0
18,610
7
here is the c-60 (bit worse for 20 some years of wear honestly... but sounds amazing) and the elan



this shot has also my Pioneer SP-700D ($15) i was using as a pre before scoring the Yammy.
 

Martialla

Honorable
Jun 14, 2013
6
0
10,510
0
Thanks Atarione for informing me about Dayton and Batuchka for posting the video.

Atarione, I think I'll take your advice and get the SMSL SA-S3. I'm thinking of getting the Micca Motion MB42. (It's too bad makers of Dayton changed manufacturers. I'm guessing they would have sold a lot more speakers if they kept the same manufacturers.) Atarione, do you know how to connect speakers and computer to the SMSL SA-S3 amp? I think I need 3.5mm to RCA stereo cable to connect amp to computer. But how do I connect Micca Motion MB42 speakers to the amp?

Thanks Batuchka. I think I know how to connect speakers to Lepai. If I get a Lepai, I know who to contact (Parts Express) if I need to learn how to connect the Lepai.

Thanks everyone.
 

Martialla

Honorable
Jun 14, 2013
6
0
10,510
0
I still need help figuring out how to attach speakers to SMSL SA-S3 amp to speakers. I think I know how to attach Lepai to speakers but the back of SMSL SA-S3 amp is different from Lepai.

Oh Yeah; one more question. If I get Lepai and have a 2A power supply instead of 4A, what is reduced? Is the volume reduced?
 

atarione

Distinguished
Apr 15, 2003
38
0
18,610
7
hey bud easiest way order from monoprice (or whatever)

but some of these

http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10401&cs_id=1040115&p_id=9436&seq=1&format=2
(technically this will be one more pair than you need but you'll have a spare I guess... way cheaper than getting 4 at bb or radioshack for sure...

and some speaker wire say like this

http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10239&cs_id=1023901&p_id=2747&seq=1&format=2



then basically cut two length of wire (make them the same length about ~ long enough to get from t-amp to speakers (leave some extra length for working with and making connections and what not..) anyways strip a bit of wire on each end (say 1/4") unscrew one of the banana plugs (red goes on the wire w/ stripe) black on one without.... stick wire through whole a bottom spread wire out around edge of lower half of banana plug screw top piece on... do that for all for 4 ends of all the speakers / amp connections then plug the banana plugs into amp and speakers (red to red / black to black obviously?).
 

Martialla

Honorable
Jun 14, 2013
6
0
10,510
0
Thanks for helping me out Atarione. What are the wire (with ends stripped off so that the copper wire protrudes) called? Are they called banana wire? I'd rather buy them than make them.

 

Martialla

Honorable
Jun 14, 2013
6
0
10,510
0
Thanks Batuchka and everyone. I think I have enough knowledge to buy speakers. If I have anymore questions, I'll come back here. Thanks!!!
 
Thread starter Similar threads Forum Replies Date
Tombo9 Audio 3
G Audio 0
K Audio 2
I Audio 3
R Audio 3
M Audio 1
D Audio 2
dankcik09 Audio 3
A Audio 1
P Audio 1
M Audio 2
I Audio 2
SubZeroFlsh Audio 1
S Audio 1
N Audio 10
B Audio 1
jtk2515 Audio 6
T Audio 2
rcald2000 Audio 3
D Audio 4

ASK THE COMMUNITY