Solved! My computer shows blue colour and cursor when I power on

Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Try these...


Option 1 ...

1. First, while the computer is off, connect an external monitor.
2. Next turn on the computer and allow it to fully load.
3. Once loaded, press the "Windows Key" + "P" to open the "Easy Display Switcher".
4. In here select "Computer only".
5. Now shut down the computer and disconnect the external monitor.
5. Disconnect the external monitor
6. And finally restart the computer.


Option 2 ...

Make sure you wait until the computer would be fully loaded before trying this, and not try it right away like you would to say get into BIOS. This needs you to actually be where you would be when Windows Explorer loads.

1. Press "Shift" repeatedly until the "sticky keys" window shows up.

2. Now click the the link there that will lead to the "Ease of Access Center".

3. Next click "Cancel" on the the bottom right corner of the "Set Up Sticky Keys" window.

4. From here you want to click "Control Panel" on the upper left corner (it should be right beside the "Make Your Computer Easier to Use" title.

5. Locate the "Computer Settings" menu and then choose the "Recovery" icon (make sure that your view of this is by either large or small icons for easier access).

6. Now click and open "System Restore".

7. Here you want to click next on the bottom right corner (a few times) until the button "Finish" shows up and then click it. (Just follow everything prompt that the window says which will lead you to recovering your previous system, in a certain time.

8. The computer will now do the work it needs to and then reboot.


If that doesn't work, you can try the following...

You can also try doing the Ctrl+Alt+Delete and see if you can get "Task Manager" to show.


If the "Task Manager" windows shows, then choose "New Task" and then type in EXPLORER. If the desktop shows up then you need to go into "Start", "Programs", then "Accessories" and finally "Command Prompt". (Or you can do a search for CMD.)

Make sure you load the "Command Prompt" with Administrator access. Then when it loads type in....

SFC /SCANNOW

It will do a file check.

To learn more about "SFC" visit this link at Microsoft... https://support.microsoft.com/en-us/kb/929833
 
Thread starter Similar threads Forum Replies Date
A Laptop Tech Support 2
J Laptop Tech Support 2
K Laptop Tech Support 1
D Laptop Tech Support 1
C Laptop Tech Support 1
J Laptop Tech Support 1
Z Laptop Tech Support 2
K Laptop Tech Support 1
M Laptop Tech Support 1
C Laptop Tech Support 1
Y Laptop Tech Support 1
H Laptop Tech Support 2
T Laptop Tech Support 2
F Laptop Tech Support 1
N Laptop Tech Support 1
P Laptop Tech Support 9
H Laptop Tech Support 1
P Laptop Tech Support 3
O Laptop Tech Support 1
M Laptop Tech Support 2
Similar threads
Solved! horizontal black lines showed up and grew on my chromebook screen?
Solved! Wifi not showing up
my computer died yesterday so i went to charge the next day its black and does not show the power light please i need help
Solved! my headphones show up on the playback tab but i cant hear anything through my computer or the headset when plugged in
Solved! computer coming on but nothing showing on screen
have internet access, but computer shows otherwise
Solved! my screen is not showing letters due to black contrast settings how do i fix that
Solved! i connet my mobile hotspot with my computer but it my phone didnt show that connection
l had lenovo g580 when l press the power button it wont show the lenovo logo
My Acer computer shows on what ndow that it says no bootable I device how can I fix this lab top
Laptop Not Showing Charging Symbol and Not Turning On
Computer does not show my home wi-fi network at times
My computer is not detecting my Seagate backup plus desktop drive. Shows up in disk management. Already updated all the drives
Acer aspire one cloud book 14 black screen nothing else shows power button is on help
My Dell Windows 8 will turn on but only shows a black screen. Help?
Black Screen Showing On Laptop
Cd is rotating but after few seconds it stops and even my computer dont show any icon change of dvd rw drive
How can I remove American Megatrends when I open our computer it shows up?
my computer said its offline my it shows me that my computer is connect to wifi
SD card with only show partial picture.

ASK THE COMMUNITY