My laptop WiFi won't connect to internet-Says not in the Network ? All wireless devices working -0ld laptop Windows 7.

woodlandsetters

Prominent
Jan 30, 2018
1
0
510
0
New router bought for Xfinity works fine with everything but my two laptops. About 10 years old and running Windows 7. I can't update security and I can't update the device drivers so I'm stuck. We started using a router approved by our internet company and there's been no issue except with my two laptops. Absolutely nothing was done to incorporate the cells or any other equipment and they work fine. I've tried everything I can. None of the troubleshooting that I'm able to get to work without internet is showing anything other than I'm not connected to a network. But I'm being told that I am nothing was changed.
 
Try this....

1. Go to "Control Panel".

2. Next go to "Network and Internet" and then "Network and Sharing".

3. Now click on "Manage Wireless Networks".

4. On this screen, remove all wireless connections by "right clicking" on it and select "Remove network" from the drop down menu.

5. After doing this, close the open windows and reboot the computer.

6. Once the computer is fully reloaded, scan for the "WiFi networks".

7. Click on the available network that you want to access and select "connect".

8. It takes a moment, but then you will be asked to give a password for your WiFi connection. Type in the password and click the "connect" button.

It should now be connected.

NOTE: If this doesn't work, you may want to reset your modem/router, and then once it is fully loaded again, repeat the above steps.

If this doesn't work, test seeing if your laptop will connect via Ethernet. If so, then your WiFi card may be going. You can either look to replace it/have it replaced, or get an external (plugs in via USB) WiFi card.


Another way to try it is to...

1. Go to "Settings".
2. Click on "Network & Security" and then click on "WiFi".
3. Now click "Manage known networks".
4. Select the WiFi connection you want to remove.
5. Click the "Forget" button.
6. After doing this, close the open windows and reboot the computer.
7. Once the computer is fully reloaded again go to "Settings".
8. Click on "Network & Security" and then click on "WiFi".
9. Now click "Manage known networks".
10. Click "Add a new network" and enter the network name.
11. Using the drop-down menu, select the "network security type".
12. Check the "Connect automatically" option.
13. Now check the "Connect even if the network is not broadcasting" option and click "Save".

Once you have completed these steps, whenever the device is within range of that particular network, it should automatically connect to it.
 
Try this....

1. Go to "Control Panel".

2. Next go to "Network and Internet" and then "Network and Sharing".

3. Now click on "Manage Wireless Networks".

4. On this screen, remove all wireless connections by "right clicking" on it and select "Remove network" from the drop down menu.

5. After doing this, close the open windows and reboot the computer.

6. Once the computer is fully reloaded, scan for the "WiFi networks".

7. Click on the available network that you want to access and select "connect".

8. It takes a moment, but then you will be asked to give a password for your WiFi connection. Type in the password and click the "connect" button.

It should now be connected.

NOTE: If this doesn't work, you may want to reset your modem/router, and then once it is fully loaded again, repeat the above steps.

If this doesn't work, test seeing if your laptop will connect via Ethernet. If so, then your WiFi card may be going. You can either look to replace it/have it replaced, or get an external (plugs in via USB) WiFi card.


Another way to try it is to...

1. Go to "Settings".
2. Click on "Network & Security" and then click on "WiFi".
3. Now click "Manage known networks".
4. Select the WiFi connection you want to remove.
5. Click the "Forget" button.
6. After doing this, close the open windows and reboot the computer.
7. Once the computer is fully reloaded again go to "Settings".
8. Click on "Network & Security" and then click on "WiFi".
9. Now click "Manage known networks".
10. Click "Add a new network" and enter the network name.
11. Using the drop-down menu, select the "network security type".
12. Check the "Connect automatically" option.
13. Now check the "Connect even if the network is not broadcasting" option and click "Save".

Once you have completed these steps, whenever the device is within range of that particular network, it should automatically connect to it.
 
Thread starter Similar threads Forum Replies Date
B Laptop Tech Support 2
H Laptop Tech Support 1
I Laptop Tech Support 3
T Laptop Tech Support 1
L Laptop Tech Support 1
TripleDigitRide Laptop Tech Support 3
D Laptop Tech Support 1
T Laptop Tech Support 1
A Laptop Tech Support 1
L Laptop Tech Support 1
S Laptop Tech Support 1
R Laptop Tech Support 1
G Laptop Tech Support 6
D Laptop Tech Support 1
D Laptop Tech Support 1
S Laptop Tech Support 1
M Laptop Tech Support 2
K Laptop Tech Support 1
K Laptop Tech Support 6
W Laptop Tech Support 3

ASK THE COMMUNITY