Solved! My Sharp Aquos TV won't turn on after a power outage.

[jesseterry2023]

Whenever the power goes out in my house, my TV won't turn on. Normally it would have a red light on when the TV is off but nothing's there. After a couple of weeks has passed, the TV will start to work again. My TV is Sharp brand and is a Aquos version. Can someone tell me how to fix this to where it won't happen again?

 

[hang-the-9]

We have using a surge protector since we bought the TV new and it's been doing it ever since.

Then try a UPS so the power does not die to the TV, although a surge protector should be enough to prevent power damage to it. Don't know what you can do to make it so it does not do this every time, probably would need to replace the power and/or system boards.

 

[hang-the-9]

Get a UPS or a good surge protector and connect the TV to that.

 

[jesseterry2023]

Get a UPS or a good surge protector and connect the TV to that.

We have using a surge protector since we bought the TV new and it's been doing it ever since.

 

[hang-the-9]

We have using a surge protector since we bought the TV new and it's been doing it ever since.

Then try a UPS so the power does not die to the TV, although a surge protector should be enough to prevent power damage to it. Don't know what you can do to make it so it does not do this every time, probably would need to replace the power and/or system boards.

 

[jesseterry2023]

Then try a UPS so the power does not die to the TV, although a surge protector should be enough to prevent power damage to it. Don't know what you can do to make it so it does not do this every time, probably would need to replace the power and/or system boards.

I think it's something to do with the power/system boards. Buying those will be very expensive so I'll just wait until I have enough money to buy another TV.

 

[Jeff Sexton]

If your so inclined, there's a chance that your model TV has a "watch" battery somewhere. Take the back of and look for a quarter size battery. Replace that. Good luck.

 

[MDTOP]

Jessi,
Try below when it happens - reset by unplugging for 10 minute and holding the power button(on tv) for a bit.
https://answers.yahoo.com/question/index?qid=20090528110641AA989nE&guccounter=1&guce_referrer=aHR0cHM6Ly9kdWNrZHVja2dvLmNvbS8&guce_referrer_sig=AQAAAHYaBQtanZvOW8MWqY1ob555M8drXmR9w0xVlq5Fga5ZxRBGFMEljwfWZ3Xumg3HPQ9wcxa3siOrTUIsoyALAXqjQgc1UXBCrw3mOgjH0CCjFVNR3ubb58s2cVwNBuDn4E_ku9qxvxW3mRgnanqhK8wDisR5cGIfG9SoIWlb3lLQ

If that fails search the net for sharp factory reset and follow those instructions. it seems that sharp tv's get scrambled with power outages surges.