My sumsung tablet 3v doesnt connect to mobile network how to fix this

Are you talking connecting to a WiFi connection, either through an ISP or through a hotspot? If so, the instructions below should help. If you are, however, saying that you have an account with a carrier/service provider to have data on the tablet, then you need to contact them if that isn't working.

NOTE: If none of the following work to resolve the problem, and if the tablet is under warranty, I would contact the manufacturer.

1. Try and restart the tablet. Sometimes it is that simple.

2. Update the firmware and any apps that need updating on the tablet.

3. If the problem persists, check your time and date on the tablet to make sure it is correct.

4. Should none of the former work...
a. Clear out the WiFi data on the tablet.
b. Reboot the modem/router.
c. Once the modem/router is fully 'up' again, reboot the tablet and re-input the WiFi data.

5. Check your internet connection. It may be what is going in and out rather than the tablet.

6. Make sure you have "Data" turned off on the device when using "WiFi" (that is if you have a plan with data through your tablet). If you don't make sure it is turned off, the device can keep trying to switch to "Data" when you try and use "WiFi".

7. Now, if you are still having the problem at this point, and you are sure it isn't the modem/router that is the problem. Then you may wish to try a "Hard Reset" of the device. However, I really suggest saving this as a last option (or last before parts repair/replacement).

NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

3. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

4. Next use "Volume Down" button to get to the "wipe data/factory reset" option When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

5. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

6. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

7. Then press the "Power" button to hard reset the tablet.
 
Are you talking connecting to a WiFi connection, either through an ISP or through a hotspot? If so, the instructions below should help. If you are, however, saying that you have an account with a carrier/service provider to have data on the tablet, then you need to contact them if that isn't working.

NOTE: If none of the following work to resolve the problem, and if the tablet is under warranty, I would contact the manufacturer.

1. Try and restart the tablet. Sometimes it is that simple.

2. Update the firmware and any apps that need updating on the tablet.

3. If the problem persists, check your time and date on the tablet to make sure it is correct.

4. Should none of the former work...
a. Clear out the WiFi data on the tablet.
b. Reboot the modem/router.
c. Once the modem/router is fully 'up' again, reboot the tablet and re-input the WiFi data.

5. Check your internet connection. It may be what is going in and out rather than the tablet.

6. Make sure you have "Data" turned off on the device when using "WiFi" (that is if you have a plan with data through your tablet). If you don't make sure it is turned off, the device can keep trying to switch to "Data" when you try and use "WiFi".

7. Now, if you are still having the problem at this point, and you are sure it isn't the modem/router that is the problem. Then you may wish to try a "Hard Reset" of the device. However, I really suggest saving this as a last option (or last before parts repair/replacement).

NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

3. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

4. Next use "Volume Down" button to get to the "wipe data/factory reset" option When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

5. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

6. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

7. Then press the "Power" button to hard reset the tablet.
 
Thread starter Similar threads Forum Replies Date
Echo_Romeo571 Android Tablets 3
P Android Tablets 1
scwolves10 Android Tablets 5
Meadow36 Android Tablets 3
ZambieMaster Android Tablets 3
L Android Tablets 1
M Android Tablets 4
LliamLliam Android Tablets 10
D Android Tablets 4
Needhelpasap98258 Android Tablets 1
I Android Tablets 2
Rsrafiner Android Tablets 1
S Android Tablets 1
S Android Tablets 1
Z Android Tablets 1
J Android Tablets 1
S Android Tablets 1
T Android Tablets 3
B Android Tablets 3
D Android Tablets 1

ASK THE COMMUNITY