Solved! Need Help, Android tablet stuck in loading screen

Status
Not open for further replies.
Jul 14, 2019
4
0
10
The problem here is that i cant access anything at all, and its stuck on loading screen. and since i have a samsung Galaxy SM T560 , i dont know how to open the back and pull the battery out. Is it bricked? or is there Any way to do a hard reset while on loading screen?
 
Solution
A "Hard Reset" would require it be turned off, and it would wipe the device and restore it to what it was originally, before anything was put on it.

Try turning it off and then start it up in "Safe Mode". If it will load in there, then you have something on the tablet that is the problem. Virus, malware, bad app, etc., that will need to be removed to fix the problem. If, however, it won't even go past the logo in "Safe Mode" then you will want to try a "Hard Reset".

NOTE: If it won't turn off, then wait for it to run out of power, plug it in to charge for a short while, and then try starting it up in "Safe Mode". Be sure you don't fully charge it first or you will have to wait a long while for it to run out of power again.

To get...
A "Hard Reset" would require it be turned off, and it would wipe the device and restore it to what it was originally, before anything was put on it.

Try turning it off and then start it up in "Safe Mode". If it will load in there, then you have something on the tablet that is the problem. Virus, malware, bad app, etc., that will need to be removed to fix the problem. If, however, it won't even go past the logo in "Safe Mode" then you will want to try a "Hard Reset".

NOTE: If it won't turn off, then wait for it to run out of power, plug it in to charge for a short while, and then try starting it up in "Safe Mode". Be sure you don't fully charge it first or you will have to wait a long while for it to run out of power again.

To get into "Safe Mode" please do the following.

1. First turn off the tablet.

2. Next press and hold "Power" until you see the manufacturers logo on the screen, then release the power button.

3. "Quickly" press "Volume Down" and hold it for few seconds until you see the message "Safe mode: ON" or something similar.

4. If you wanted disable it, simply repeat the steps above, and you should see "Safe Mode: OFF" rather than on.


To do a "Hard Reset" follow the instructions below.

NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Remove your SD card, if there is one in the device.

3. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

4. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

5. Next use "Volume Down" button to get to the "wipe data/factory reset" option.

6. When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

7. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

8. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

9. Then press the "Power" button to hard reset the tablet.

10. If you took your SD card out in step 2, when the device is up and running again, reinsert the SD card.
 
  • Like
Reactions: Sia111
Solution
Jul 14, 2019
4
0
10
alright, i managed to pull the battery out and pull it back in but despit holding the home button and volu
A "Hard Reset" would require it be turned off, and it would wipe the device and restore it to what it was originally, before anything was put on it.

Try turning it off and then start it up in "Safe Mode". If it will load in there, then you have something on the tablet that is the problem. Virus, malware, bad app, etc., that will need to be removed to fix the problem. If, however, it won't even go past the logo in "Safe Mode" then you will want to try a "Hard Reset".

NOTE: If it won't turn off, then wait for it to run out of power, plug it in to charge for a short while, and then try starting it up in "Safe Mode". Be sure you don't fully charge it first or you will have to wait a long while for it to run out of power again.

To get into "Safe Mode" please do the following.

1. First turn off the tablet.

2. Next press and hold "Power" until you see the manufacturers logo on the screen, then release the power button.

3. "Quickly" press "Volume Down" and hold it for few seconds until you see the message "Safe mode: ON" or something similar.

4. If you wanted disable it, simply repeat the steps above, and you should see "Safe Mode: OFF" rather than on.


To do a "Hard Reset" follow the instructions below.

NOTE: Doing this will clear 'all' the data on your tablet, so it is suggested you not choose this option unless you have to, or aren't worried about losing anything on the device.

Be sure you back up any data you want to keep, to a computer or cloud account, before doing the reset.


To "Hard Reset" the tablet...

1. Make sure that the tablet is actually powered off.

2. Remove your SD card, if there is one in the device.

3. Press the "Power" and the "Volume Up" buttons, together, until you see the start-up logo on the screen.

4. Once you can see the logo, release the buttons and allow the device to enter the "System Recovery Mode".

5. Next use "Volume Down" button to get to the "wipe data/factory reset" option.

6. When in recovery mode the "Volume Up" and "Volume Down" buttons are how to can navigate and highlight what option you need.

7. Once you have selected the "wipe data/factory reset", press the "Power" button to select that option.

8. On the following screen, repeatedly press the "Volume Down" button until the "Yes - delete all user data" option is what is selected.

9. Then press the "Power" button to hard reset the tablet.

10. If you took your SD card out in step 2, when the device is up and running again, reinsert the SD card.
i managed to pull the battery out, and couldnt enter safe mode. I also couldnt Do a complete hard reset either. Noticed that it actually freezes up in screen, and wouldnt respond after that. Besides waiting for the batteries to completely die, is there anything else i could do?
EDIT if you hold power and volume up for a while, the screen goes blank and the logo appears again, but doing that with volme down has no reaction whatsoever.
 
Last edited:
Status
Not open for further replies.