Need help splicing earbuds to an earpod lightning connector.

Apr 13, 2018
2
0
20
1
I'm trying to splice my KZ ZS6 headphone wire with the lightning connector off a pair of Earpods. From what I've found, pic attached shows what each wire is for. I've tried splicing the grounds, the lefts, and the rights together, and just left out the mic wire and it didn't work. Does anyone have any advice on how to make this work, if it can be done at all? Thanks in advance.


 
Apr 13, 2018
2
0
20
1
Figured it out! Connected the left wire from the KZ to the left and left/ground of the lightning connector. Then the right KZ wire to the right and right/ground of the lightning connector. According to ifixit, there's an amp and dac built in to the lightning jack.
 
Apr 13, 2018
2
0
20
1
Figured it out! Connected the left wire from the KZ to the left and left/ground of the lightning connector. Then the right KZ wire to the right and right/ground of the lightning connector. According to ifixit, there's an amp and dac built in to the lightning jack.
 
Thread starter Similar threads Forum Replies Date
imspeechless_1 Audio 5
Mattng7 Audio 1
Nontypical Audio 0
taylorfla Audio 1
T Audio 1
Quackityduck Audio 3
W Audio 0
A Audio 1
S Audio 1
C Audio 1
accessgamer Audio 3
georgeano Audio 2
S Audio 1
E Audio 1
G Audio 1
B Audio 3
R Audio 2
tekhaze Audio 1
G Audio 3
D Audio 2

ASK THE COMMUNITY