Solved! NW-100 Low Audio

[Astonephus]

I have a condenser mic going through a Neewer NW-100 phantom power unit and then into the 1/4 input of a Behringer Xenyx mixer. The audio level I'm getting is very low. If I take the same mic into the mixer via an XLR input, the volume level is fine. I understand the 1/4 input is line level, but I feel like I should be getting something better than what I'm seeing.

I've done some googling and have yet to find anything useful as far as a solution. Any advice?

 

[americanaudiophile]

You can't use a line level input with a mic. Just not enough gain and probably an impedance mismatch as well.
The phantom power supply doesn't affect that.