Solved! How to setup Condenser Mic to a surface or Laptop or Ipad

[jinuv]

I bought NW-800 condenser microphone with Neewer 100 48 V phantom power using 5V USB , female XLR to 3.5mm jack(to Laptop as OUT). Phantom power is turned on and can see the light but mic is not being detected or being heard. Need help

 

[hang-the-9]

That is a lower end product, and there are quite a few reported issues with it, try to exchange it for another one to see if it will work. Or use a higher end interface like from Focusrite, PreSonus, Behringer.

 

[americanaudiophile]

A mic has to be connected to an input not an output.

 

[hang-the-9]

That is a lower end product, and there are quite a few reported issues with it, try to exchange it for another one to see if it will work. Or use a higher end interface like from Focusrite, PreSonus, Behringer.

 

[jinuv]

A mic has to be connected to an input not an output.

My Mic is connected as INPUT and not as OUTPUT