panasonic plasma no power after lightning strike

[wannaboon]

the lightning strike occurred when the tv was in standby mode. after unplugging and replugging the power cord and trying to turn on and off the tv via the main switch, i decided to open up the rear panel

there is no visible signs of damage after opening up the rear panel.

the 2 fuses show continuity after testing. all the boards show no sign of damage. i opened up the emc filter box. shows no signs of burning or damage

kindly advise how i should go about finding the faulty component.

thanks

 

[NocturnalPing]

Do any of the capacitors on the Power board seem to be popped or raised? My guess would be the power supply board is now kaput. Still within warranty? you could always see if the manufacturer will cover it.

 

[wannaboon]

the capacitors seem fine.

no burn marks anywhere

emc filter also working, outputing voltage as per normal

 

[americanaudiophile]

Since the TV is dead the power supply would be the most likely failure. Check out
www.shopjimmy.com for info and replacement boards.