Pocket CAD

[ANON]

Archived from groups: microsoft.public.pocketpc (More info?)

I'm looking for a Pocket CAD prog to run on my PPC (2003). PocketCAD pro
seems to be the only one around. Anyone heard of anything else? I need to
interrogate an item to get it's angle of dangle, for instance (e.g. when
it's a line). PocketCAD doesn't seem to do this.
TIA
Skysurfer

 

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

In message <#LpuPXxeEHA.3928@TK2MSFTNGP11.phx.gbl>, "Anon"
<skysurfer_uk@hotmail.com> wrote:
>
> I'm looking for a Pocket CAD prog to run on my PPC (2003). PocketCAD pro
> seems to be the only one around. Anyone heard of anything else? I need to
> interrogate an item to get it's angle of dangle, for instance (e.g. when
> it's a line). PocketCAD doesn't seem to do this.
> TIA
> Skysurfer
>

Try looking for PocketDGN on Google. It is reasonably priced and may work
for you.

-Posted from my MDA II via the T-Moble network.

 

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

"Anon" <skysurfer_uk@hotmail.com> wrote:

>I'm looking for a Pocket CAD prog to run on my PPC (2003). PocketCAD pro
>seems to be the only one around. Anyone heard of anything else? I need to
>interrogate an item to get it's angle of dangle, for instance (e.g. when
>it's a line). PocketCAD doesn't seem to do this.
>TIA
>Skysurfer
>

Old, but some of the other apps listed may still be valid.
--
__________________________________________________________________________________
Ed Hansberry (Please do *NOT* email me. Post here for the benefit of all)
What is on my Pocket PC? http/www.ehansberry.com/
Microsoft MVP - Mobile Devices www.pocketpc.com
What is an MVP? - http/mvp.support.microsoft.com/

 

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

I use a program called GENGISCAD that is compatible with DXF output from
Autocad. It even has some GIS type capabilities. The problem is that the
support all seems to be in Portugese or brazilian.

Try googling GenGisCAD.


"Anon" <skysurfer_uk@hotmail.com> wrote in message
news:%23LpuPXxeEHA.3928@TK2MSFTNGP11.phx.gbl...
> I'm looking for a Pocket CAD prog to run on my PPC (2003). PocketCAD pro
> seems to be the only one around. Anyone heard of anything else? I need to
> interrogate an item to get it's angle of dangle, for instance (e.g. when
> it's a line). PocketCAD doesn't seem to do this.
> TIA
> Skysurfer
>
>

 

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

Cool prog, too bad it doesn't seem to run on WM 2k3...
unless I'm missing something.

(total lockup with e750 requiring soft reset)

"Spot" <kseise@iwon.com> wrote in message
news:2nnve4F2rh60U1@uni-berlin.de...
> I use a program called GENGISCAD that is compatible with DXF output from
> Autocad. It even has some GIS type capabilities. The problem is that the
> support all seems to be in Portugese or brazilian.
>
> Try googling GenGisCAD.
>
>
> "Anon" <skysurfer_uk@hotmail.com> wrote in message
> news:%23LpuPXxeEHA.3928@TK2MSFTNGP11.phx.gbl...
> > I'm looking for a Pocket CAD prog to run on my PPC (2003). PocketCAD pro
> > seems to be the only one around. Anyone heard of anything else? I need
to
> > interrogate an item to get it's angle of dangle, for instance (e.g. when
> > it's a line). PocketCAD doesn't seem to do this.
> > TIA
> > Skysurfer
> >
> >
>
>

 

[Guest]

Archived from groups: microsoft.public.pocketpc (More info?)

Bummer. It works fine on an Axim X5


"V Green" <vanceg@nowhere.net> wrote in message
news:OB5QKIbfEHA.2396@TK2MSFTNGP11.phx.gbl...
> Cool prog, too bad it doesn't seem to run on WM 2k3...
> unless I'm missing something.
>
> (total lockup with e750 requiring soft reset)
>
> "Spot" <kseise@iwon.com> wrote in message
> news:2nnve4F2rh60U1@uni-berlin.de...
> > I use a program called GENGISCAD that is compatible with DXF output from
> > Autocad. It even has some GIS type capabilities. The problem is that
the
> > support all seems to be in Portugese or brazilian.
> >
> > Try googling GenGisCAD.
> >
> >
> > "Anon" <skysurfer_uk@hotmail.com> wrote in message
> > news:%23LpuPXxeEHA.3928@TK2MSFTNGP11.phx.gbl...
> > > I'm looking for a Pocket CAD prog to run on my PPC (2003). PocketCAD
pro
> > > seems to be the only one around. Anyone heard of anything else? I need
> to
> > > interrogate an item to get it's angle of dangle, for instance (e.g.
when
> > > it's a line). PocketCAD doesn't seem to do this.
> > > TIA
> > > Skysurfer
> > >
> > >
> >
> >
>
>