Powered mixers

BobChiz

Distinguished
Oct 10, 2009
2
0
18,510
0
good day gents,
I have a samson xm610 powered mixer, I recently bought it and I currently use a set of cheap phonic speakers 100 watt.
My question is should the clip lites lite up? I'm new bee to audio set ups.
 

BassBallz

Distinguished
Aug 27, 2009
17
0
18,570
2
The clip lights should only flicker the slightest bit when you are at your loudest volumes. Clipping means that your audio signal is too hot for the board. Back it off a little bit otherwise you'll either

A. Burn out the board

or

B. Blow your speakers
 

BassBallz

Distinguished
Aug 27, 2009
17
0
18,570
2
The clip lights should only flicker the slightest bit when you are at your loudest volumes. Clipping means that your audio signal is too hot for the board. Back it off a little bit otherwise you'll either

A. Burn out the board

or

B. Blow your speakers
 

BobChiz

Distinguished
Oct 10, 2009
2
0
18,510
0
thx for the reply, I have scince bought a pair of EV sx100's and hve a good handle on diling the mixer in. I still get the clip lites but we have a better sound with the EV's.

thx again
 
Thread starter Similar threads Forum Replies Date
Simpson&×2 Audio 1
F Audio 1
P Audio 1
F Audio 1
D Audio 3
M Audio 1
S Audio 1
S Audio 1
D Audio 2
D Audio 1
F Audio 7
M Audio 2
A Audio 2
T Audio 1
G Audio 1
J Audio 3
D Audio 1
T Audio 2
P Audio 1
C Audio 1

ASK THE COMMUNITY