ps3 to projector

[tomym23]

Hi I have a ps3 going to benq ms500 via the yellow video wire and it all looks good my question is if I use hdmi to vga instead of the yellow video wire will the picture improve much ?

 

[americanbrian]

your projector is only 800x600 so I don't think so.

 

[tomym23]

Yes but stat sheet says supports up to 1080p I'm a complete newbie at this so is that not hd

 

[americanbrian]

it will downsize 1080p to 800x600. there are simply that many pixels. it will accept the signal and downsize it.

 

[tomym23]

So it will be a complete waste of money to buy a hdmi to vga connection ?

 

[americanbrian]

I am going to say yes. Unless you just like looking at it.. or if you can use it for something else?

 

[tomym23]

How about the s video connection still the same outcome yes

 

[americanbrian]

unless you are getting noise/artifacts from the cabling then it will be much of a muchness. you will not get a sharper image.

 

[tomym23]

Thanks for quick replys

 

[boju]

No, all the above are wrong. Projectors are different and not your usual monitor you can compare to. The Lens is quite small in projectors and the compression in a 800*600 lens can easily display 1080p with crisp.

Hdmi will be much much much improvement.

 

[americanbrian]

source please. nothing to do with lenses. there are pixels and there are a number of them and no matter what you have the same number of them regardless of the signal.

 

[americanbrian]

http/www.hometheaterforum.com/topic/303345-how-does-a-native-svga-800x600-create-a-max-uxga-1600x1200-1080p-image/

See, I have a source. I don't believe in "magic"

 

[americanbrian]

http/www.bigscreenforums.com/forum_topic.cfm?which=18161

 

[boju]

http/www.plus-america.com/resolution.html

i am talking about upscaling. a 800*600 projector can do it, if it says it can do 1080p upscaling then it will. I've seen it done personally and the lens window was also 800*600. You're talking about a window of the size of a footy card, you know how dense the pixels are...

 

[tomym23]

Now I'm confused

 

[americanbrian]

His link is to a CRT monitor page that basically says what I am saying. He seems a bit confused.

 

[americanbrian]

http/www.whathifi.com/news/jargon-buster-all-you-need-to-know-about-upscaling

this is what upscaling is and it is to do with the source signal being a lower resolution than the display. NOT the other way around.

 

[tomym23]

Still confused did I not tell you guys I'm a newbie ha ha

 

[americanbrian]

just read briefly the links we have posted and you will see that they all say the same thing.

 

[boju]

http/www.manualowl.com/m/BenQ/MS500/Manual/220876

Below page 54 using Ypbpr Component

Using d-sub to ypbpr

Its all in the manual, magic wont be printed.