Solved! Sharp Aquos LC60LE644U has sound & no picture

Status
Not open for further replies.

lioneltrainsfan

Prominent
Dec 17, 2017
1
0
510
Tried reset procedure by unplugging, pressing volume down & channel down buttons and plugging back in without any success. Still no picture at all. When this first started, I was able to get the Sharp logo after unplugging and reconnecting the set. Now nothing seems to work. The TV is only 2 and one half years old and my extended warranty ended 6 mos ago.

Please HELP!!!
 
Solution
If you want to open it up, there are some troubleshooting threads online --
https://www.badcaps.net/forum/showpost.php?p=592363&postcount=18
https://www.badcaps.net/forum/showthread.php?t=49088
https://www.badcaps.net/forum/showthread.php?t=43436

There isn't much that is repairable. It is generally just buy a board. There are used boards on e-bay from sets where the screen cracked. Take good pictures of all the markings on the boards in your set. Also watch a video on youtube to disconnect the flat ribbon cables without damaging anything.

kanewolf

Judicious
Moderator
If you want to open it up, there are some troubleshooting threads online --
https://www.badcaps.net/forum/showpost.php?p=592363&postcount=18
https://www.badcaps.net/forum/showthread.php?t=49088
https://www.badcaps.net/forum/showthread.php?t=43436

There isn't much that is repairable. It is generally just buy a board. There are used boards on e-bay from sets where the screen cracked. Take good pictures of all the markings on the boards in your set. Also watch a video on youtube to disconnect the flat ribbon cables without damaging anything.
 
Solution
Status
Not open for further replies.