Spark/fried display connection on Asus laptop

[phazon90]

I have an Asus X550Z laptop (Motherboard #: 60NB07A0-MB1400_X550ZA) and replaced the screen. I didn't disconnect the battery when I replaced it, and it sparked when connecting the screen cable. Now there is no display when I turn the laptop on. Also, the HDD access LED light does not blink or flash after the initial blink when I start the laptop.

I know, shame on me. I took a look at the motherboard where the connector for the screen attaches and noticed a small cracked piece (fuse?) that is surface mounted. Is there a way to ID this part and is it possible to replace?

Picture of motherboard: https/imgur.com/IxBIuTO

Thank you!
Tony

 

[pctech2005]

Based on the image, I think you will have to replace the motherboard.

 

[jarotech]

Hi, yes it could be a fuse, take a close-up of the component so I can see where it is connected.

 

[phazon90]

Hi, yes it could be a fuse, take a close-up of the component so I can see where it is connected.

Here is a closer picture:
https/imgur.com/TSpzoMa

Thanks!

 

[jarotech]

It's difficult without schematics, can you read the voltages on the motherboard, do you have a multimeter?

 

[phazon90]

It's difficult without schematics, can you read the voltages on the motherboard, do you have a multimeter?

I have a multimeter, but do not see any voltages on the motherboard. Though I don't know exactly where to be looking.