Speakers Hum/Buzz When Ethernet is Connected?

[username77]

I have an analog receiver connected to a laptop via an RCA to 3.5mm jack adapter then a 15 or so ft 3.5mm cord running to the laptop. The speakers that are connected to the receiver, when on the laptop's input, play FM radio.. even when the FM antenna is pulled from the receiver. Recently, I ran a CAT 6 Ethernet cable to the laptop and now the FM radio volume has increased, and a loud buzzing sound has started coming from the speakers that are connected to the receiver. As soon as the Ethernet cable is unplugged, the humming stops. How can I fix this?

 

[americanaudiophile]

Something like this
http/www.sonicelectronix.com/item_40537_NVX-XGLI35.html
should help with the hum problem.
The FM radio problem may be due to the long audio cable from the laptop to the receiver acting like an antenna. The ground isolator might help you with that too. If not then an RF filter or better shielded cable might help.
http/www.audioholics.com/audio-video-cables/bulletproofing-your-system-from-interference

 

[username77]

Something like this
http/www.sonicelectronix.com/item_40537_NVX-XGLI35.html
should help with the hum problem.
The FM radio problem may be due to the long audio cable from the laptop to the receiver acting like an antenna. The ground isolator might help you with that too. If not then an RF filter or better shielded cable might help.
http/www.audioholics.com/audio-video-cables/bulletproofing-your-system-from-interference

Thanks or the quick reply, sorry I just saw this. I will order the ground loop isolator and update from there. Thanks again!

 

[username77]

Update: I did not end up ordering the ground loop isolator because I have rearranged the laptop and speakers and they are closer now so I used a shorter cord and it has solved the problem but i'm sure your answer would have resolved it so I will choose yours as the solution.

Thanks.