Toshiba Microphone/Headphone Port not recognizing my mic

DUALASSASSIN

Commendable
Jul 26, 2016
2
0
1,510
0
I have a Toshiba Windows ten laptop with a headphone/microphone port an I bought a OONHUA Microphone SH-66 model microphone and when i plug it in it just blocks out sound on my laptop can I get any help with this
 
Try the following....

If your microphone isn't working, try the following...

1. Go to "Control Panel".
2. Click on "Sound".
3. Click the "Recording" tab.
4. Click on the device you are trying to fix.
5. Now click the "Configure" button and then click "Set up Microphone".
6. Once that is complete, click the "Properties" button.
7. When you are done with your changes, in "Properties", click "Apply" and then "OK".
8. Then click "OK", again, on the main "Sound window".

Also... If your speaker/headphones aren't working, try the following...

1. Go to "Control Panel".
2. Click on "Sound".
3. Make sure you are on the "Playback" tab.
4. Click on the device you are trying to fix.
5. Now click the "Configure" button and follow the prompts. (Be sure you also click the "Test" button.)
6. Once that is complete, click the "Properties" button.
7. When you are done with your changes, in "Properties", click "Apply" and then "OK".
8. Then click "OK", again, on the main "Sound window".
 
Try the following....

If your microphone isn't working, try the following...

1. Go to "Control Panel".
2. Click on "Sound".
3. Click the "Recording" tab.
4. Click on the device you are trying to fix.
5. Now click the "Configure" button and then click "Set up Microphone".
6. Once that is complete, click the "Properties" button.
7. When you are done with your changes, in "Properties", click "Apply" and then "OK".
8. Then click "OK", again, on the main "Sound window".

Also... If your speaker/headphones aren't working, try the following...

1. Go to "Control Panel".
2. Click on "Sound".
3. Make sure you are on the "Playback" tab.
4. Click on the device you are trying to fix.
5. Now click the "Configure" button and follow the prompts. (Be sure you also click the "Test" button.)
6. Once that is complete, click the "Properties" button.
7. When you are done with your changes, in "Properties", click "Apply" and then "OK".
8. Then click "OK", again, on the main "Sound window".
 
Thread starter Similar threads Forum Replies Date
R Laptop Tech Support 1
B Laptop Tech Support 5
KnottyCord Laptop Tech Support 2
ahindi Laptop Tech Support 0
Debs70 Laptop Tech Support 3
R Laptop Tech Support 0
Blitzkreig Laptop Tech Support 1
Rickrj Laptop Tech Support 1
R Laptop Tech Support 2
S Laptop Tech Support 1
Shion Tomoe Laptop Tech Support 0
J Laptop Tech Support 0
Adele K Laptop Tech Support 1
J Laptop Tech Support 4
O Laptop Tech Support 2
T Laptop Tech Support 2
D Laptop Tech Support 2
S Laptop Tech Support 2
N Laptop Tech Support 1
G Laptop Tech Support 2

ASK THE COMMUNITY

TRENDING THREADS