Hello to everyone reading. The laptop in the thread title has problems recongizing any kinds of USB devices. When a device is plugged the OS will detected that something has been plugged in and the peripheral will receive power, but it will just throw up errors of being not recognized and etc. I have tried a lot of things, but to no avail, like:
1. It came with Windows XP, reinstalled it using original recovery disks and after seeing that it wasn't the problem installed Windows 10 on it.
2. Booting from USB doesn't work aswell, using PLOP will just freeze everything or say that there is no bootable device attached
3. Since i have another fully functioning one decided to swap the drives to see if that installation with correct drivers will resolve it, it didn't.
I would gladly accept any help regarding this problem. If anyone asks, the specs are:
Intel Celeron M 410, ATI XPRESS 200M GPU and ATI IXP 450 Southbridge. The rest shouldn't be necessary but if someone needs it i would write it.
1. It came with Windows XP, reinstalled it using original recovery disks and after seeing that it wasn't the problem installed Windows 10 on it.
2. Booting from USB doesn't work aswell, using PLOP will just freeze everything or say that there is no bootable device attached
3. Since i have another fully functioning one decided to swap the drives to see if that installation with correct drivers will resolve it, it didn't.
I would gladly accept any help regarding this problem. If anyone asks, the specs are:
Intel Celeron M 410, ATI XPRESS 200M GPU and ATI IXP 450 Southbridge. The rest shouldn't be necessary but if someone needs it i would write it.