Using behringer xenyx 502 mixer

[probson94]

Behringer xenyx 502 mixer

Can this be used with a mic and MacBook as an input and a Sony speaker as the output?

Thanks

 

[Kenton82]

Hi, yeas it can, providing the Sony speaker is 'active' (it has its own built in amplifier)

 

[probson94]

Hi, yeas it can, providing the Sony speaker is 'active' (it has its own built in amplifier)

Not sure, it's a Sony gtk-xb7. Also if it can be, what cables would be needed?

Thanks

 

[Kenton82]

In that case, then yes, that speaker is active. (it has a built in amp) To connect it up to the mixer, you will need one of these - http/www.thatcable.com/product/2-RCA-Male-to-2-x-6.35mm-Mono-Plug-Cable

Have fun!
K.

 

[probson94]

In that case, then yes, that speaker is active. (it has a built in amp) To connect it up to the mixer, you will need one of these - http/www.thatcable.com/product/2-RCA-Male-to-2-x-6.35mm-Mono-Plug-Cable

Have fun!
K.[/

Sorry to be a pest, haha. But would you be able to tell me what to use to connect my MacBook Pro to the mixer? It's a 2015 model with retina etc. I would be using the mac as an input for music, mic as an input for vocals and obviously the speaker as an output.

Thanks again, Peter

 

[Kenton82]

You are not being a pest what so ever This is what the forum is for, and we are only to glad to help!
The cable you will need for your MacBook to the mixer is https/www.amazon.co.uk/3-5mm-Stereo-6-35mm-Mixer-Cable-x/dp/B01BYOEVOQ

Good luck and i hope you get it all up and running!
Regards,
K.