G
Guest
Guest
Well, I think it's about time I made this post in the hope that someone out there is able to see the wood for the trees.
In Jan this year I had to send my MSI GX660R away for repair due no power/dead (turned off a couple of times then wouldn't power up).
MSI europe (I think the Polish base) repaired it over a period of about 6 weeks ("waiting for the part") and was received back all fine apart from one small point: The power plug wasn't a snug fit for the socket, you had to "hold it right" to get it to power. It wasn't extreme, just a bit of adjustment needed.
This was causing the socket to occasionally get a little warm. One day over the summer it was left charging and got rather too warm; the plugs plastic parts had melted onto the pin in the DC power socket. Getting the cable out broke the pin off the middle of the socket. I'm not sure if they are trying to say it's my fault for having to wrestle the plug out of the socket but I can only imagine how much extra damage there would be had if I returned it with the plug still wedged in the back. They'd almost certainly have more excuses to wriggle out of warranty fix on their hands than a crack on the socket.
All this has been explained VERY clearly to both MSI and D&J Henry Ltd, their repair agents in the UK.
Today (after a few mails back and forth re-telling my story and pointing out the previous RMA which D&J had no clue/record of despite me mentioning it) I finally get this mail back:
http/img26.imageshack.us/img26/1489/140048c.jpg
Now I'd hope it was pretty obvious to ANYONE with half a brain that if the pin inside the socket has been snapped off then OF COURSE there is going to be physical damage to the socket. Attempting to claim lack of warranty on this technicality is simply outrageous.
Anyone think they have much of a case or am I on the right track here? Couple of sternly worded emails explaining what I think and what's fair etc.
In Jan this year I had to send my MSI GX660R away for repair due no power/dead (turned off a couple of times then wouldn't power up).
MSI europe (I think the Polish base) repaired it over a period of about 6 weeks ("waiting for the part") and was received back all fine apart from one small point: The power plug wasn't a snug fit for the socket, you had to "hold it right" to get it to power. It wasn't extreme, just a bit of adjustment needed.
This was causing the socket to occasionally get a little warm. One day over the summer it was left charging and got rather too warm; the plugs plastic parts had melted onto the pin in the DC power socket. Getting the cable out broke the pin off the middle of the socket. I'm not sure if they are trying to say it's my fault for having to wrestle the plug out of the socket but I can only imagine how much extra damage there would be had if I returned it with the plug still wedged in the back. They'd almost certainly have more excuses to wriggle out of warranty fix on their hands than a crack on the socket.
All this has been explained VERY clearly to both MSI and D&J Henry Ltd, their repair agents in the UK.
Today (after a few mails back and forth re-telling my story and pointing out the previous RMA which D&J had no clue/record of despite me mentioning it) I finally get this mail back:
Dear Customer,
Please find attached photo of damaged DC jack. There is a crack on plastic frame and according to our engineer this is a mechanical damage which cannot be repaired under warranty. Please contact our Repair Agents to inform them how do you want to proceed.
Kind regards,
http/img26.imageshack.us/img26/1489/140048c.jpg
Now I'd hope it was pretty obvious to ANYONE with half a brain that if the pin inside the socket has been snapped off then OF COURSE there is going to be physical damage to the socket. Attempting to claim lack of warranty on this technicality is simply outrageous.
Anyone think they have much of a case or am I on the right track here? Couple of sternly worded emails explaining what I think and what's fair etc.