Solved! WANTED: HDMI 1020 Splitter 1 to 2 unaffected by a 720 on an out

[ccinpa]

I have a 1020 output I need to interface with two outputs… One 1020 and other 720. As you most likely know… Because of the one 720… The two outputs default to 720. BUT, I need the outputs not to do the default thing. Help?

 

[americanaudiophile]

You need a distribution amp with EDID settings.
https/atlona.com/product/at-ron-442/
This one learns the HDMI 1 display EDID to HDMI 2.
You second display does need to be able to accept 1080p even it it has to down convert it to 720p. If it doesn't then you would need a scaler to do that.

 

[ccinpa]

You need a distribution amp with EDID settings.
https/atlona.com/product/at-ron-442/
This one learns the HDMI 1 display EDID to HDMI 2.
You second display does need to be able to accept 1080p even it it has to down convert it to 720p. If it doesn't then you would need a scaler to do that.

Thanks for the information... Checking it out now!

 

[ccinpa]

It took a bit to find this... Here seems to be the solution: