Peak

Forum discussion tagged with Peak.
  1. K

    rms700/peak 1400w subwoofer using 1000w mono amp will it damage the sub?

    rms700/peak 1400w subwoofer using 1000w mono amp will it damage the sub?
  2. LWFG001

    Powered Speaker Actual Watts Used Question

    I'm hooking up a couple of project studio 8 monitors which have the following features: 1. LF driver: Magnetically shielded, 8" mineral-filled polypropylene cone with neodymium magnet, 1-1/2" diameter high-temperature voice coil, and damped rubber surround 2. HF driver: Magnetically...
  3. C

    how much output does an amplifier furnish to the subwoofer output

    my amp has a subwoofer output of about 50 mv peak to peak as read on a scope. Is that enough to power a powered subwoofer or is my amp bad?
  4. B

    Looking for a low budget

    I have buy a QSC GX7 in 8ohm is725 watt and in 4ohm is 1000w my speakers is 500rms, 1000 program peak 2000w peavey i want to know if i can use the QSC power amps with these speakers or change these speaker into 4ohm to get the 1000 watt or the will be fine with the 8ohm in 725w
  5. C

    BIC/Acoustech PL-200 or Klipsch R-10SW?

    Hey, I'm looking for a new subwoofer. My local bestbuy is having a sale on their Klipsch R-10SW Subwoofer. Original price was $350 but now it's $175. It's peak wattwage is 300w and 150w continuous. However I found a BIC/Acoustech Platinum Series PL-200 that produces 250 continuous watts with...
  6. T

    Behringer VP1800S passive subwoofers

    Tom, Can you daisy chain the Behringer VP1800S passive subs witch are rated at 400 watts continuous 1600 watts peak into a bridged 3100 watt power amp without frying the voice coils?
  7. N3rdR4ge

    Price check on vintage Altec Lansing 510A speakers?

    No idea what they are worth. Here's a picture.
  8. S

    Help with amp for sub

    I have a Kicker 10CVX102 http://www.crutchfield.com/p_2060CVX102/Kicker-10CVX102.html Will this amp go well with it PIONEER GM-D9601 http://www.crutchfield.com/p_130GMD9601/Pioneer-GM-D9601.html The sub is 600 watt rms and 1200 peak and will be wired at 4 ohms The amp is 500 watt rms at 4 ohms...
  9. L

    Amplifier and Speakers Noob Question

    I have an old Sony Compact Disk Deck Receiver(SONY HCD-H550K). According to its amplifier spec, it produces 30+30w output per channel, a peak of 300 watts with speaker output impedance from 6-16ohms and its speakers spec only states its impedance which is at 6ohms(no wattage and other info). I...
  10. M

    700 watt amp, 800watt sub, will it work fine?

    I currently have a 700 watt JBl GTO7001 amp with a Alpine 800 watt peak sub. Just wandering if the amp will work all fine, and will it run the risk of overheating?
  11. B

    I Can't Understand Speaker Amplification.

    I've Probably read 50 articles and forums by now. What will work? What won't work? What is Ideal? Watts, rms, peak, peak to peak, Ohms, wiring, bi-wiring, solid state, tube, cheap, expensive, how do you match it all up? A chart would be very helpful. I don't mean any offence but I likely...
  12. J

    can i run a 1000 watt amp with a 1500 watt peak sub

    I'm buying a blue Pyle 15 in sub. It peaks at 1500 watt. What watt amp should I buy?
  13. N

    Sony Vegas Pro 12 audio problem. No audio in clips!? peak building.

    I recently recorded some Skyrim gameplay using dxtory. When I went to drag the file into sony vegas it doesn't even build any peaks and I don't have any existing peak files. There is no audio when I play it. No it isn't muted or anything. I played the file in windows media player and It was...
  14. A

    Why won't my 2000w sub amp power a 1000w max peak car sub?

    ***UPDATED 2:30 PM 12/23/13*** (If you have already read the article, just look for the stars to view updated information) [Blue colored words are responses to responders so all new coming people may be caught up on important information without going through all the comments] I recently...