Solved! A deep screw that turns but wont come out

[sudantheking8]

I have an Asus N53SV and I am trying to open up the laptop. I have unscrewed three of the four parts, but the fourth screw is in a hole and I can turn it, but it wont come out. I have tried using tape and rubber bands, but it wont come out. Anyone have ideas on how I should take the screw out of the laptop.

 

[webworkings]

Have you tried either turning it over, to see if it is loose enough to fall out or a magnet? Just be careful where the magnet gets near.

 

[sudantheking8]

Have you tried either turning it over, to see if it is loose enough to fall out or a magnet? Just be careful where the magnet gets near.

I have tried twisting it while its upside down and it turns but it still wont come out.I will try the magnet.

 

[sudantheking8]

Have you tried either turning it over, to see if it is loose enough to fall out or a magnet? Just be careful where the magnet gets near.

I have tried twisting it while its upside down and it turns but it still wont come out.I will try the magnet.

 

[sudantheking8]

Have you tried either turning it over, to see if it is loose enough to fall out or a magnet? Just be careful where the magnet gets near.

I have tried twisting it while its upside down and it turns but it still wont come out.I will try the magnet.

 

[The Paladin]

I usually use a small flat screwdriver to put under the lip of screw if possible while turning the screwdriver, forcing the screw to come up with the light pressure of the flat screwdriver.