A while back I went into my system and disabled my touch pad. Now I cannot figure out how to re enable it. Pressing fn and 9

[prss0821]

Re enabling my touch pad internally.

 

[webworkings]

Try the following...

1. Go into "Control Panel".
2. Click "Hardware and Sound".
3. Now click "Mouse and Touchpad".
4. Now go to "Additional mouse options".
5. The Mouse Properties window will open. In here click on your device.
6. Make sure your device is set to enabled. If it isn't then click "Enable Device".
7. Exit both that screen and "Control Panel".

 

[prss0821]

Try the following...

1. Go into "Control Panel".
2. Click "Hardware and Sound".
3. Now click "Mouse and Touchpad".
4. Now go to "Additional mouse options".
5. The Mouse Properties window will open. In here click on your device.
6. Make sure your device is set to enabled. If it isn't then click "Enable Device".
7. Exit both that screen and "Control Panel".

 

[prss0821]

Thanks, but I have already gone to control panel, hardware and sound, and clicked on mouse pad (there is nothing for touch pad, When I click on mouse pad there is nothing in there relating to a touch pad.

 

[webworkings]

That is rather odd. There should be the option to enable the device. Unless it was removed rather than disabled.

Have you tried going into "Device Manager" and checking for hardware changes?

 

[Wolfshadw]

Try doing a double tap in each of the corners of the touchpad. On some systems, if you double tap the corner of the touchpad, it toggles activation. I just do not remember which corner it is.

-Wolf sends

 

[TheTrendyTechGuy]

Just put your model number and "toch manual" you will find many youtube tutorials.

 

[prss0821]

Webworkings: That worked perfectly. Thank You so much!