Hello all. I have an Acer m5-581t-6405 laptop that was showing windows 8 to be corrupt. It had the blue windows 8 recovery screen with an error code, and I could not access anything because the keyboard wasn't working. Long story short, I disassembled the laptop, cleaned the keyboard contacts, and was able to repair windows 8.
Everything seemed fine, but then the BSOD came on with an error code (which i dont recall at this point). I restarted the laptop and also noticed the battery was not holding a charge, so i disassembled again and pulled out battery to match the numbers to order a new one.
I reassembled the laptop and now I am at my current state of not being able to power it on. Only the blue power light comes on for about 8 seconds and turns off.
I have cleaned and reseated the RAM. Ive pulled out battery, ac power, and pressed/held power button for 60 sec. Ive pressed and held reset button on mobo for 60 sec. Ive re-tightened all screws and reseated all cable attachments/connections.
Checking different forums and videos I came across one other person that had the same issue of not powering on after disassembly/reassembly, but it was only a comment under a youtube video with no reply. 🙁
Sorry for the long description, just wanted to cover everything. Please I am at my wits end, and thinking of the possibility of buying a new motherboard! Thank you very much!
Everything seemed fine, but then the BSOD came on with an error code (which i dont recall at this point). I restarted the laptop and also noticed the battery was not holding a charge, so i disassembled again and pulled out battery to match the numbers to order a new one.
I reassembled the laptop and now I am at my current state of not being able to power it on. Only the blue power light comes on for about 8 seconds and turns off.
I have cleaned and reseated the RAM. Ive pulled out battery, ac power, and pressed/held power button for 60 sec. Ive pressed and held reset button on mobo for 60 sec. Ive re-tightened all screws and reseated all cable attachments/connections.
Checking different forums and videos I came across one other person that had the same issue of not powering on after disassembly/reassembly, but it was only a comment under a youtube video with no reply. 🙁
Sorry for the long description, just wanted to cover everything. Please I am at my wits end, and thinking of the possibility of buying a new motherboard! Thank you very much!