How do i solve the aptio setup utility? I have an asus laptop X552L and I have windows 10. I've already enabled "launch CSM" and disabled "Secure Boot Control" and then tried to save and exit, it didn't work. I tried to reboot and press "F8" - doesn't work either. I don't know much about this it never happened to me before. Please help me.
webworkings
Titan
- Apr 6, 2016
- 25,136
- 261
- 113,340
Well, the save and exit for that option is only part of the fix, and F8 isn't part of the rest. 
Try the following...
1. In the Aptio Setup Utility, select the "boot" menu and then select "Launch CSM" and change it to "enable".
2. Next select the "Security" menu and then select "secure Boot Control" and change to "disable".
3. Now select "Save & Exit" and press "yes".
4. Once you have done this, hold down the "power" button until the laptop turns off completely.
5. Now you want to power it back on and continually press the "F9" button for about ten seconds or until you are taken to the "Windows Recovery Menu".
6. In here select "Advanced Start Up" and then, once the recovery menu appears, select "Advance Options".
7. Choose "System Restore" and select a date prior to when the problem started.
The computer should now go through the restore process and then start normally for you.
Try the following...1. In the Aptio Setup Utility, select the "boot" menu and then select "Launch CSM" and change it to "enable".
2. Next select the "Security" menu and then select "secure Boot Control" and change to "disable".
3. Now select "Save & Exit" and press "yes".
4. Once you have done this, hold down the "power" button until the laptop turns off completely.
5. Now you want to power it back on and continually press the "F9" button for about ten seconds or until you are taken to the "Windows Recovery Menu".
6. In here select "Advanced Start Up" and then, once the recovery menu appears, select "Advance Options".
7. Choose "System Restore" and select a date prior to when the problem started.
The computer should now go through the restore process and then start normally for you.
webworkings :
Well, the save and exit for that option is only part of the fix, and F8 isn't part of the rest. Try the following...
1. In the Aptio Setup Utility, select the "boot" menu and then select "Launch CSM" and change it to "enable".
2. Next select the "Security" menu and then select "secure Boot Control" and change to "disable".
3. Now select "Save & Exit" and press "yes".
4. Once you have done this, hold down the "power" button until the laptop turns off completely.
5. Now you want to power it back on and continually press the "F9" button for about ten seconds or until you are taken to the "Windows Recovery Menu".
6. In here select "Advanced Start Up" and then, once the recovery menu appears, select "Advance Options".
7. Choose "System Restore" and select a date prior to when the problem started.
The computer should now go through the restore process and then start normally for you.
Try the following...1. In the Aptio Setup Utility, select the "boot" menu and then select "Launch CSM" and change it to "enable".
2. Next select the "Security" menu and then select "secure Boot Control" and change to "disable".
3. Now select "Save & Exit" and press "yes".
4. Once you have done this, hold down the "power" button until the laptop turns off completely.
5. Now you want to power it back on and continually press the "F9" button for about ten seconds or until you are taken to the "Windows Recovery Menu".
6. In here select "Advanced Start Up" and then, once the recovery menu appears, select "Advance Options".
7. Choose "System Restore" and select a date prior to when the problem started.
The computer should now go through the restore process and then start normally for you.
Similar threads
Facebook
Twitter