blue screen default

Andy_104

Commendable
Oct 7, 2016
1
0
1,510
0
BLUR SCREEN AND IT SAYS DEFAULT BOOT DEVICE OR BOOT FALIED INSERT RECOVERY MEDIA AND HIT ANY KEY......DONT HAVE ANY RECOVERY
 
Please do not use all caps, it is considered yelling, and is often harder to read.

If you are getting that message then something has gone wrong with either your OS or your hard drive.

How To Fix "Operating System Not Found" or "Missing Operating System" error.

1. You will need your Windows OS (Operating System) CD or bootable Windows OS USB device.
2. Connect the bootable USB device or insert the CD into your computer.
3. Now use the "F2, F12 and Delete" keys enter BIOS setup.
4. Click "Repair Your Computer" below the "Install Now" button.
5. While you are in the "Repair Your Computer" open "CMD" (Command Prompt).
6. When you are in "CMD" type “diskpart” then type “list volume”.
7. Next you will be in "list volume". All volumes should be shown.
8. Find your system volume, where the windows are installed and then type “select volume ###“(system volume C) shows on CMD. Ex. select volume 3.
9. After you have selected the volume, type “ACTIVE“. Your system partition is active now.
10. Now type ”exit” to leave diskpart and then type ”exit” again to close CMD.
11. That’s it now RESTART your computer.

This should work, if you follow the steps correctly.

NOTE: When typing in anything, do not include the quote "" marks, otherwise things will not work correctly.

If you don't have a CD or USB with the original OS on it, you will need to get one, or create one, to do this fix. The software can be found here... https://www.microsoft.com/en-us/software-download
 
Please do not use all caps, it is considered yelling, and is often harder to read.

If you are getting that message then something has gone wrong with either your OS or your hard drive.

How To Fix "Operating System Not Found" or "Missing Operating System" error.

1. You will need your Windows OS (Operating System) CD or bootable Windows OS USB device.
2. Connect the bootable USB device or insert the CD into your computer.
3. Now use the "F2, F12 and Delete" keys enter BIOS setup.
4. Click "Repair Your Computer" below the "Install Now" button.
5. While you are in the "Repair Your Computer" open "CMD" (Command Prompt).
6. When you are in "CMD" type “diskpart” then type “list volume”.
7. Next you will be in "list volume". All volumes should be shown.
8. Find your system volume, where the windows are installed and then type “select volume ###“(system volume C) shows on CMD. Ex. select volume 3.
9. After you have selected the volume, type “ACTIVE“. Your system partition is active now.
10. Now type ”exit” to leave diskpart and then type ”exit” again to close CMD.
11. That’s it now RESTART your computer.

This should work, if you follow the steps correctly.

NOTE: When typing in anything, do not include the quote "" marks, otherwise things will not work correctly.

If you don't have a CD or USB with the original OS on it, you will need to get one, or create one, to do this fix. The software can be found here... https://www.microsoft.com/en-us/software-download
 
Thread starter Similar threads Forum Replies Date
Ashley Muller Laptop Tech Support 3
E Laptop Tech Support 1
newuser@123 Laptop Tech Support 1
TheKiwi01 Laptop Tech Support 3
N Laptop Tech Support 2
M Laptop Tech Support 1
D Laptop Tech Support 0
M Laptop Tech Support 7
MrChard39 Laptop Tech Support 0
Reh@n Laptop Tech Support 3
TehAsezOner Laptop Tech Support 0
Muaaz.Ulhaq Laptop Tech Support 3
Philbert24 Laptop Tech Support 1
H Laptop Tech Support 1
Indigo79 Laptop Tech Support 9
C Laptop Tech Support 1
S Laptop Tech Support 1
D Laptop Tech Support 4
J Laptop Tech Support 1
E Laptop Tech Support 7

ASK THE COMMUNITY

TRENDING THREADS